ProMariner Catalogue

WATERPROOF BATTERY CHARGERS 19

promariner.com

ProMar1 Digital Series Selection

Model Part #

ProMar1 DS 5

ProMar1 DS 10

ProMar1 DS 15

31505

31510

31515

Volts DC DC Amps

12V

12V/24V

12V/24V/36V

10A

15A

Max No. of Batteries 1 Bank

2 Banks

3 Banks

Charging

up to 14.1V DC 12.8–13.5V DC

Auto-maintain DC Cable Length

6'/6'

6'/6'/6'

Size

6.4"x4.1"x2.4"

9.2"x5.7"x2.4"

10.5"x6.5"x3.0"

Weight

4 lbs

7 lbs

11 lbs

VAC / Max Amps

110–120V DC, 50/60Hz / 1.2A

110–120V DC, 50/60Hz / 2.4A

110–120V DC, 50/60Hz / 3.6A

AC Plug

NEMA 5–15

Operating Temperature

-4°F to 122°F (-20°C to 50°C)*

-4°F to 122°F (-20°C to 50°C)* -40°F to 158°F (-40°C to 70°C)

Storage Temperature -40°F to 158°F (-40°C to 70°C)

*output derates at 122°F (50°C)

Fully Automatic 4-Stage Charging Stage 1 - Analyze Mode

AC Power is applied. ProMar1 DS’s red Charging LED will light indicating it is analyzing individual wiring connections for proper connection/polarity and that each battery is over 4.0 VDC and capable of accepting a precharge. When completed, any errors will trip a battery specific red fault LED, or if no faults are present the red Charge LED will remain solid red. Stage 2 & 3 - Charge / Conditioning Mode During this mode the red charging LED will be solid on indicating each battery is being charged in constant current mode as controlled by temperature until the battery voltage is raised to 14.1 VDC and will hold at 14.1 VDC in constant voltage mode for 2 to 3 hours to condition each battery. When completed, the red Charging LED will shut off. Stage 4 - Energy Saver Auto-maintain Mode During this mode the blue AC Power and green Auto-maintain LED will be solid on indicating each battery is being monitored while the charger is in standby mode consuming little to no power until the battery drops under 12.8 VDC (fully charged) and the charger outputs will turn on and auto- maintain the battery in a fully charged state.This is fully automatic and safe for short and long term storage.