ELECTRIC TRIM TAB KITS 9
lencomarine.com
Edge Mount Trim Tab Kits 12V System
Electro-Polished Edge Mount Trim Tab Kits 12V System All the same features of the Edge Mount series with the addition of Electro-Polished blades. Electro-Polish adds a mirror finish and the ultimate corrosion protection. Actuator mounts at the trailing edge of these 12" (30.5 cm) blades giving them a 3" (7.6 cm) lower mounting height. Boat Lengths 14' (4.3 m) to 30' (9.1 m)
Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a ½" (1.3 cm) lower mounting height on 9" (22.9 cm) long blades & 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. Boat lengths 14' (4.3 m) to 36' (11 m)
15116-101
15016-101
Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with a 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.
Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge, & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.
Kits include: • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets
Kits include: • (2) 12-gauge stainless steel Electro-Polished blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware
= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.
= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.
• Lenco owner’s/installation manual • Stainless steel mounting hardware
13.5" (34.29 cm) height needed for actuator in 9" (22.86) tab length
Edge Mount
Retail Box See check-list below
Edge Mount
Retail Box See check-list below
11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length
11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length
3/8" (.95 cm)
3/4" (1.9 cm)
12" (30.48 cm)
12" (30.48 cm)
Boat Length 14'–18'
Hinge Height
Min.Transom Height
Retail Box
Hinge Height
Min Transom Height
Retail Box
Part # L" X W" 15013-101 9" x 9"
Part #
L" X W" Boat Length
2" (5.1 cm) 13.5" (34.3 cm) Yes 2" (5.1 cm) 13.5" (34.3 cm) Yes
15115-101 15116-101
12" x 9" 14'–18' 12" x 12" 17'–30'
2" (5.1 cm) 11" (27.9 cm) Yes 2" (5.1 cm) 11" (27.9 cm) Yes
15014-101 9" x 12" 16'–25' 15015-101 12" x 9" 14'–18' 15016-101 12" x 12" 17'–30' 15017-101 12" x 18" 26'–36'
2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm)
Yes Yes
Switch kits sold separately See pages 30–32
–
Switch kits sold separately See pages 30–32
Powered by FlippingBook