Lenco Catalog 2024

ELECTRIC TRIM TAB KITS 11

lencomarine.com

LS-Limited Space Trim Tab Kits 12V System TWO STYLES TO CHOOSE FROM

Airboat Trim Tab Kit 12V System

Engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. These kits are updated with 11-gauge stainless steel blades. Boat lengths 14' (4.3 m) to 25' (7.6 m)

The world’s first Airboat specific design. The planing surface provides greater lift and less drag. Engineered to prevent the tab from digging in during hard turns resulting in a safer ride

15125-101 Standard Actuator

15088-101 XDS Actuator

15112-101 shown here

Retracted

Extended

4" X 12" Tab Size

Blades are constructed of a stronger 11-gauge laser cut 304 stainless steel and 3/8" (9.5 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.

Blade is constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a welded on stainless steel adjustable lower actuator mounting bracket & 1/8" (3.2 mm) diameter hinge pin. High impact corrosion proof upper mounting bracket with mechanical cable gland seal.

Kits include: • (2) 11-gauge stainless steel blades with option of standard finish or electro-polished finish • (2) actuators with 6' (1.8 m) lead and Deutsch connectors

Kit includes: • (1) 12-gauge stainless steel standard finish blade with 2" (5.1 cm) hinge height • (1) actuator with 6' (1.8 m) lead and Deutsch connector • (1) 30133-002 actuator extension wiring harness - 14' (4.3 m) length • (1) 15085-001 upper mounting bracket with gland seal

• (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

• Lower mounting brackets included • Lenco owner's/installation manual • Stainless steel mounting hardware

• Lower mounting bracket included • Lenco owner's/installation manual • Stainless steel mounting hardware

Part #

L" X W" Actuator In Kit Description

15112-101

9" x14" 15055-001

Airboat Kit without Switch

Special Airboat Switch sold separately

Airboat Trim Tab Switch Recommended (See page 32) Airboat Single Rocker Switch with Deutsch Receptacle. & (2) 30" (76.2 cm) Non- Terminated Power Leads - Clamshell Packaged

Min. Transom Height

Hinge Height

Actuators In Kit

Blade Finish

Part #

Description

Part # L" X W"

15095-001

Airboat Trim Tab Switch

15125-101 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Standard 15126-101 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Electro- Polished 15052-101 4" x 12" 13" (33 cm) 2" (5.1 cm) 15057-001 Standard 15088-101 4" x 12" 13" (33 cm) 2" (5.1 cm) 15057-001 Electro- Polished

Switch kits sold separately See pages 30–32