Lenco Catalog 2024

WE MAKE THE BEST BOATS BETTER!

AVICO GROUP

TAKING YOU FURTHER Navico Group is the world’s leading supplier of integrated systems and products to industries ranging from marine to recreational vehicle and beyond. We offer an unmatched portfolio comprised of industry-leading brands in power management, digital control & monitoring, networked devices and marine electronics.

Battery Management Circuit Protection Power Distribution bluesea.com

Integrated Lithium-Ion Management System fathomepower.com

Battery Management Power Distribution bepmarine.com

Digital Control & Monitoring Onboard / Offboard UX czone.net

®

Chartplotters Radar Autopilots Sonar Technology simrad-yachting.com

Wire Wire Management ancorproducts.com

Water, Fuel & Lighting Systems

Lithium Batteries Portable Power AGM Batteries relionbattery.com

Chartplotters Displays Instruments Sensors bandg.com

Seating & Pedestals Marine Accessories & Hardware attwoodmarine.com

Trolling Motors motorguide.com

Chartplotters Fishfinders Sonar & Radar Trolling Motors lowrance.com

Bilge Pumps Waste Pumps Freshwater Systems Water Heating whalepumps.com

Battery Chargers promariner.com

Actuators Trim Tab Systems lencomarine.com

AC Shore Power DC Power Connection marinco.com

Marine Cartography c-map.com

Seating, Pedestals & Ladders Marine Accessories & Hardware garelick.com

Batteries Power Conversion Battery Management Transformers Alternators & Regulators Digital Control & Monitoring mastervolt.com

See how far our innovations can take you at Navico.com

I Company Philosophy Here at Lenco Marine, we have a passion that can’t be taught – it’s a commitment to producing quality products and providing excellent customer service that is shared by each and every member of the Lenco team. We work hard every day and are proud to deliver exciting, dependable, environmentally friendly products that will make your time on the water as enjoyable as it should be. Our dedication to quality and attention to detail give every member of the Lenco team the confidence to say, We pride ourselves on providing superior customer experiences. Our Warranty & Technical Support Team are here to handle all Customer requests directly through our factory. Troubleshooting help, part number assistance, warranty claim processing & much more are just a phone call away. We are also proud to announce, as of April 1st, 2019, we have extended our 3 year warranty coverage to 5 years for all standard trim tab applications. I Product Selection “We make the best boats better!” I Customer Service Lenco Marine is the true industry leader in the marine and boating world, manufacturing not only trim tabs but also electric actuators, hatch lifts, switches and the Auto Glide boat leveling system I Worldwide Access to Product A distribution network in multiple countries provides access to products when they are needed I Information 24-hour access to product information, selection tools, and technical articles online at lencomarine.com I Quality Our consistent commitment to producing only the highest quality products has proven to be an essential ingredient for the continued growth of the company What makes Lenco Marine different:

Table of Contents

Electric Trim Tab Kits Standard Mount Kits

8 9

Edge Mount Kits

Complete Trim Tab Kits Limited Space Kits Airboat Trim Tab Kit Standard Performance Kits Heavy Duty Performance Extreme Duty Performance

10 11 11 12 12 13

p. 8

p. 9

p. 10

p. 11

p. 12

High Performance Kits

14, 15

Super Strong Kits Heavy Duty Kits

16 17

p. 16

p. 17

p. 12

p. 13

p. 15

Trim Tab Selection Guide 19 Auto Glide System & Accessories Auto Glide Aftermarket Kits

with Existing NMEA 2000 Networks 24 Auto Glide Aftermarket Kits without Existing NMEA 2000 Networks 24 Auto Glide Key Pad 24 Auto Glide Control Box 24 Control Box Harness 24 Auto Glide Adapter Cables 25 NMEA 2000 Network Accerssories 25 Auto Glide 2nd Station Kits 25 Auto Glide GPS & Accessories 25 Control Box Accessories 25

p. 24

p. 24

p. 24

p. 24

p. 24, 25

p. 24, 25

p. 24, 25

p. 24, 25

p. 24, 25

p. 24, 25

p. 24, 25

p. 25

p. 25

p. 25

p. 25

p. 25

p. 25

p. 25

p. 25

p. 25

p. 25

p. 25

p. 25

p. 25

p. 25

p. 25

Switch & Flybridge Kits And Accessories Standard Integrated Switch 28 LED Integrated Switches 28 LED (TWO-PIECE) Switch Single 29 LED (TWO-PIECE) Switch Dual 29 Double Rocker Single w/o Pigtail 29 Double Rocker Switch Single 30 Double Rocker Switch Dual 30 Airboat Trim Tab Rocker Switch 30 Hatch Lift Rocker Switch Single 31, 37 Hatch Lift Rocker Switch Dual 31, 37 Flybridge Standard (ALL-IN-ONE) 32 Flybridge LED (ALL-IN-ONE) 32 Flybridge LED (TWO-PIECE) 32 p. 28 p. 30 p. 32

p. 29

p. 28

p. 29

p. 29

p. 30

p. 30

p. 31

p. 31

p. 32

p. 32

Actuators & Hatch lifts Trim Tab Actuator Guide

34 35 35 35 35 35 36 36 37 37

101 Standard Actuator

101 XD Actuator

101 XDS (Short) Actuator

102 Actuator

102 HD/XD Actuator

Electric Hatch Lifts 12 Volt Electric Hatch Lifts 24 Volt Stainless Steel bracket Stainless Steel Pull Pin

p. 35

Hatch Lift Rocker Switch (Single) Hatch Lift Rocker Switch (Dual)

31, 37 31, 37

p. 37

p. 37

p. 37

p. 36

Replacement Parts & Trim Tab Accessories Bennett Hydraulic to Lenco Electric 38 Limited Space Replacement Blades 39 Most Common Replacement Blades 39 All Other Series Replacement Blades 39 120 Lower Mounting Bracket 40 p. 39

p. 39

p. 39

p. 40

p. 40

Upper Mounting Bracket with Gland Seal 40 Standard Upper Bracket with Gland Seal 40 7 Degree Mounting Shim 40 Standard Lower Mounting Bracket 40 Compact Upper Bracket with Gland Seal 40 Hinge & Upper Bracket Screws 40 Actuator Replacement Hardware 40 101 Actuator Hardware 40 Remote Gland Seal Kit 40 3-3/4" & 1-7/8" Sacrificial Anodes 40 Deutsch Plug Kit (Pack of 5) 40 Deutsch Receptacle Kit (Pack of 5) 40 Deutsch Plug Electrical Repair Kit 40 Actuator Extension Harnesses 40 Replacement Hatch Lift Pull Pin 41 Delrin Mounting Pins 41 36" & 72" Power Pigtail for Switches 41 72" Power Pigtail for Control Box 41 Flybridge Key Pad Extension Harnesses 41 Replacement Y Connector Harness 41 HD Heavy Duty Actuator 41

p. 40

p. 40

p. 40

p. 40

p. 40

p. 40

p. 40

p. 40

p. 40

p. 40

p. 40

p. 40

p. 40

p. 40

p. 41

p. 41

p. 41

p. 41

p. 41

p. 41

p. 41

Index Part Number Index

42

ELECTRIC TRIM TAB KITS

Standard Mount Kits

Edge Mount Kits

Limited Space Kits

Airboat Kits

8

9

11

11

Ideal for most common style boats from center console fishing boats to cuddy cabin

Designed for boat applications where a lower actuator mounting height is desirable.

Engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design.

The world’s first Airboat specific design. The planing surface provides greater lift and less drag. Engineered to prevent the tab from digging in during hard turns resulting in a safer ride.

cruisers. Boat lengths 14′ (4.3 m) to 69′ (21 m).

Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco Electric Trim tabs

FUEL EFFICIENT

INSTANT RESPONSE

ELECTRIC POWERED 100%

PLUG & PLAY

MADE IN THE USA

ECO FRIENDLY

AUTO GLIDE COMPATIBLE

ELECTRIC

ELECTRIC TRIM TAB KITS

High Performance Kits

Super Strong Kits

Heavy Duty (HD) Kits

15

16

The Heavy Duty Kits are designed for the most extreme conditions. These systems come equipped with the new Heavy Duty Actuator. 17

The Heavy Duty series is designed & built for the boats that need extra strength to support them in rougher water at higher speeds.

This Super Strong design is for sport fishing, large cruising and commercial vessels.

ELECTRIC TRIM TAB KITS 8

lencomarine.com

Standard Mount Trim Tab Kits 12V System

Electro-Polished Standard Mount Trim Tab Kits 12V System All the same features of the Standard Mount series with the addition of Electro-Polished blades. Electro-Polish adds a mirror finish and the ultimate corrosion protection. Boat lengths 16' (4.9 m) to 30' (9.1 m)

The series that started the electric revolution! Our original Trim Tab design and still the most popular series we build. Ideal for most common style boats from center console fishing boats to cuddy cabin cruisers. Boat lengths 14' (4.3 m) to 69' (21 m)

15113-101

15001-101

Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Kits include: • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors

Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Kits include: • (2) 12-gauge stainless steel Electro- Polished blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors

• (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware

• (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

Standard Mount

Retail Box See check-list below

Standard Mount

Retail Box See check-list below

14" (35.56 cm) max. height needed for actuator

14" (35.56 cm) max. height needed for actuator

3/8" (.95 cm)

5/8" (1.59 cm)

3/4" (1.9 cm)

3/8" (.95 cm)

5/8" (1.59 cm)

3/4" (1.9 cm)

12" (30.48 cm)

9" (22.86 cm)

12" (30.48 cm)

9" (22.86 cm)

Boat Length

Hinge Height

Min Transom Height

Retail Box

Boat Length

Hinge Height

Min Transom Height

Retail Box

Part #

L" X W"

Part #

L" X W"

15000-101 9" x 9" 14'–18' 15001-101 9" x 12" 16'–25' 15002-101 9" x 18" 22'–30' 15003-101 9" x 24" 26'–40' 15004-101 9" x 30" 30'–50' 15005-101 9" x 36" 34'–65' 15007-101 12" x 12" 17'–30' 15008-101 12" x 18" 26'–36' 15009-101 12" x 24" 30'–44' 15010-101 12" x 30" 34'–54' 15011-101 12" x 36" 38'–69'

2" (5.1 cm) 14" (35.6 cm) 2" (5.1 cm) 14" (35.6 cm) 2" (5.1 cm) 14" (35.6 cm) 1" (2.5 cm) 14" (35.6 cm) 1" (2.5 cm) 14" (35.6 cm) 1" (2.5 cm) 14" (35.6 cm) 2" (5.1 cm) 14" (35.6 cm) 2" (5.1 cm) 14" (35.6 cm) 1" (2.5 cm) 14" (35.6 cm) 1" (2.5 cm) 14" (35.6 cm) 1" (2.5 cm) 14" (35.6 cm)

Yes Yes

15113-101 15114-101

9" x 12" 16'–25' 12" x 12" 17'–30'

2" (5.1 cm) 14" (35.6 cm) Yes 2" (5.1 cm) 14" (35.6 cm) Yes

– – – –

Switch kits sold separately See pages 30–32

Yes

– – – –

Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 9

lencomarine.com

Edge Mount Trim Tab Kits 12V System

Electro-Polished Edge Mount Trim Tab Kits 12V System All the same features of the Edge Mount series with the addition of Electro-Polished blades. Electro-Polish adds a mirror finish and the ultimate corrosion protection. Actuator mounts at the trailing edge of these 12" (30.5 cm) blades giving them a 3" (7.6 cm) lower mounting height. Boat Lengths 14' (4.3 m) to 30' (9.1 m)

Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a ½" (1.3 cm) lower mounting height on 9" (22.9 cm) long blades & 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. Boat lengths 14' (4.3 m) to 36' (11 m)

15116-101

15016-101

Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with a 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.

Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge, & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.

Kits include: • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets

Kits include: • (2) 12-gauge stainless steel Electro-Polished blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner’s/installation manual • Stainless steel mounting hardware

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

• Lenco owner’s/installation manual • Stainless steel mounting hardware

13.5" (34.29 cm) height needed for actuator in 9" (22.86) tab length

Edge Mount

Retail Box See check-list below

Edge Mount

Retail Box See check-list below

11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length

11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length

3/8" (.95 cm)

3/4" (1.9 cm)

12" (30.48 cm)

12" (30.48 cm)

Boat Length 14'–18'

Hinge Height

Min.Transom Height

Retail Box

Hinge Height

Min Transom Height

Retail Box

Part # L" X W" 15013-101 9" x 9"

Part #

L" X W" Boat Length

2" (5.1 cm) 13.5" (34.3 cm) Yes 2" (5.1 cm) 13.5" (34.3 cm) Yes

15115-101 15116-101

12" x 9" 14'–18' 12" x 12" 17'–30'

2" (5.1 cm) 11" (27.9 cm) Yes 2" (5.1 cm) 11" (27.9 cm) Yes

15014-101 9" x 12" 16'–25' 15015-101 12" x 9" 14'–18' 15016-101 12" x 12" 17'–30' 15017-101 12" x 18" 26'–36'

2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm)

Yes Yes

Switch kits sold separately See pages 30–32

Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 10

lencomarine.com

Complete Standard Trim Tab Kits 12V System Everything you need in one box! The Standard trim tab kit with the added benefit of having the integrated switch choice & power connector all included. Boat lengths 16' (4.9 m) to 30' (9.1 m)

Complete Edge Mount Trim Tab Kits 12V System

Everything you need in one box! The Edge Mount trim tab kit with the added benefit of having the integrated switch choice & power connector all included. Boat lengths 17' (5.2 m) to 30' (9.1 m)

3 switches to choose from:

3 switches to choose from:

Double Rocker

Standard Integrated

LED Integrated

Double Rocker

Standard Integrated

LED Integrated

Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Switch included.

Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Switch included.

Kits include: • (1) Switch Kit - Choose Double Rocker, Standard Integrated or LED Integrated • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets

Kits include: • (1) Switch Kit - Choose Double Rocker, Standard Integrated or LED Integrated • (2) 12-gauge stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

• Lenco owner’s/installation manual • Stainless steel mounting hardware

• Lenco owner’s/installation manual • Stainless steel mounting hardware

Standard Mount

Retail Box Packaged with all kits shown

Edge Mount

Retail Box Packaged with all kits shown

14" (35.56 cm) max. height needed for actuator

11" (27.94 cm) height needed for actuator in 12" (30.48 cm) tab length

3/8" (.95 cm)

3/4" (1.9 cm)

3/8" (.95 cm)

5/8" (1.59 cm)

3/4" (1.9 cm)

12" (30.48 cm)

9" (22.86 cm)

12" (30.48 cm)

Part #

L" X W" Kit Description Switch Kit Included

15101-104 15104-102 15108-103 15103-104 15105-102 15109-103

9" x 12" Standard 9" x 12" Standard 9" x 12" Standard 12" x 12" Standard 12" x 12" Standard 12" x 12" Standard

Double Rocker Switch

Part #

L" X W" Kit Description Switch Kit Included

Standard Integrated Switch

15102-104 15106-102 15110-103

12" x 12" Edge Mount 12" x 12" Edge Mount 12" x 12" Edge Mount

Double Rocker Switch

LED Integrated Switch Double Rocker Switch

Standard Integrated Switch

LED Integrated Switch

Standard Integrated Switch

LED Integrated Switch

ELECTRIC TRIM TAB KITS 11

lencomarine.com

LS-Limited Space Trim Tab Kits 12V System TWO STYLES TO CHOOSE FROM

Airboat Trim Tab Kit 12V System

Engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. These kits are updated with 11-gauge stainless steel blades. Boat lengths 14' (4.3 m) to 25' (7.6 m)

The world’s first Airboat specific design. The planing surface provides greater lift and less drag. Engineered to prevent the tab from digging in during hard turns resulting in a safer ride

15125-101 Standard Actuator

15088-101 XDS Actuator

15112-101 shown here

Retracted

Extended

4" X 12" Tab Size

4" X 12" Tab Size

Blades are constructed of a stronger 11-gauge laser cut 304 stainless steel and 3/8" (9.5 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.

Blade is constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a welded on stainless steel adjustable lower actuator mounting bracket & 1/8" (3.2 mm) diameter hinge pin. High impact corrosion proof upper mounting bracket with mechanical cable gland seal.

Kits include: • (2) 11-gauge stainless steel blades with option of standard finish or electro-polished finish • (2) actuators with 6' (1.8 m) lead and Deutsch connectors

Kit includes: • (1) 12-gauge stainless steel standard finish blade with 2" (5.1 cm) hinge height • (1) actuator with 6' (1.8 m) lead and Deutsch connector • (1) 30133-002 actuator extension wiring harness - 14' (4.3 m) length • (1) 15085-001 upper mounting bracket with gland seal

• (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

• Lower mounting brackets included • Lenco owner's/installation manual • Stainless steel mounting hardware

• Lower mounting bracket included • Lenco owner's/installation manual • Stainless steel mounting hardware

Part #

L" X W" Actuator In Kit Description

15112-101

9" x14" 15055-001

Airboat Kit without Switch

Special Airboat Switch sold separately

Airboat Trim Tab Switch Recommended (See page 32) Airboat Single Rocker Switch with Deutsch Receptacle. & (2) 30" (76.2 cm) Non- Terminated Power Leads - Clamshell Packaged

Min. Transom Height

Hinge Height

Actuators In Kit

Blade Finish

Part #

Description

Part # L" X W"

15095-001

Airboat Trim Tab Switch

15125-101 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Standard 15126-101 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Electro- Polished 15052-101 4" x 12" 13" (33 cm) 2" (5.1 cm) 15057-001 Standard 15088-101 4" x 12" 13" (33 cm) 2" (5.1 cm) 15057-001 Electro- Polished

Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 12

lencomarine.com

Standard Performance Trim Tab Kits 12V System Our first series designed specifically for performance. This system comes equipped with a thicker reinforced hinge and complimented with an Electro-Polished finish for added quality and protection. Boat lengths 13' (4 m) to 40' (12.2 m)

Heavy Duty (HD) Performance Trim Tab Kits 12V System The Heavy Duty series is designed & built for the boats that need extra strength to support them in rougher water at higher speeds. Boat lengths 18' (5.5 m) to 42' (12.8 m)

15037-101 Electro-Polished

15043-101 Electro-Polished

Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin.

Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin. Full transom back plate with welded on stainless steel upper & adjustable lower actuator mounting brackets, 5/16" (.8 cm) stainless steel mounting bolts & mechanical strain-relief cable seals. 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 12-gauge stainless steel Electro-Polished blades • (2) 15055-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length

Kits include: • (2) 12-gauge stainless steel Electro-Polished blades • (2) 15054-001 actuators with 6' (1.8 m) leads & Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

• Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

• Lenco owner's/installation manual • Stainless steel mounting hardware

SHIPPED FULLY ASSEMBLED

Hinge Height

Min. Transom Height 13.5" (34.3 cm) 13.5" (34.3 cm) 11" (27.9 cm) 11" (27.9 cm) 11" (27.9 cm) 11" (27.9 cm) 11" (27.9 cm)

Part #

L" X W" 9" x 9" 9" x 12" 12" x 9"

Boat Length

15034-101 15035-101 15036-101 15037-101 15038-101 15039-101 15040-101

13'–20' 16'–26' 16'–26'

2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm) 2" (5.1 cm)

Back Plate Dimensions

12" x 12" 18'–32' 14" x 12" 19'–34' 16" x 12" 20'–36' 18" x 14" 22'–40'

6" (15.2 cm)

5" (12.7 cm)

15044-101

15041-101 15042-101 15043-101

8" (20.3 cm) 2"

8" (20.3 cm)

10" (25.4 cm)

10" (25.4 cm)

2" (5.1 cm)

(5.1 cm)

12" (30.5 cm)

14" (35.6 cm)

Switch kits sold separately See pages 30–32

The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.

Part #

L" X W"

Boat Length Min. Transom Height

15041-101 15042-101 15043-101 15044-101

12" x 12" 14" x 12" 16" x 12" 18" x 14"

18'–34' 19'–36' 20'–38' 22'–42'

10.5" (26.7 cm) 10.5" (26.7 cm) 10.5" (26.7 cm) 10.5" (26.7 cm)

Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 13

lencomarine.com

Extreme Duty (XD) Performance Trim Tab Kit 12V System / Single Actuator The only single actuator Extreme Duty design offered. This kit is similar to our Heavy Duty Performance series with a thicker, stronger blade for those boaters who run hard in extreme conditions. Boat lengths 20' (6.1 m) to 40' (12.2 m)

Extreme Duty (XD) Performance Trim Tab Kit 12V System / Dual Actuator All the robust features of our single actuator XD series with twice the actuator power for larger, faster boats that don't back away from rough conditions. Boat lengths 23' (7 m) to 50' (15.2 m)

15045-101 Electro-Polished

15046-101 Electro-Polished

Blades are constructed of Electro-Polished 10-gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.

Blades are constructed of Electro-Polished 10-gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.

Kit includes: • (2) 10-gauge stainless steel Electro-Polished blades • (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) See page 42

Kits include: • (2) 10-gauge stainless steel Electro-Polished blades • (4) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (4 required) See page 42

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

SHIPPED FULLY ASSEMBLED

SHIPPED FULLY ASSEMBLED

Back Plate Dimensions

Back Plate Dimensions

5" (12.7 cm)

6" (15.2 cm)

8" (20.3 cm)

8" (20.3 cm) 2"

10" (25.4 cm)

10" (25.4 cm)

2" (5.1 cm)

(5.1 cm)

12" (30.5 cm)

14" (35.6 cm)

The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.

The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.

Part #

L" X W"

Boat Length Min. Transom Height

Part #

L" X W"

Boat Length Min. Transom Height

15045-101

15046-101 15047-101

17" x 12"

20'–40'

10.5" (26.7 cm)

19" x 14" 24" x 14"

23'–45' 25'–50'

10.5" (26.7 cm) 10.5" (26.7 cm)

Switch kits sold separately See pages 30–32

Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 14

lencomarine.com

High Performance (HP) Trim Tab Kits 12V System / Single Actuator

TECH TIP

This powerful, unique series is designed for multiple engine applications with limited transom space. The contoured blade design allows for extra space for engines to turn as well as decreasing and preventing cavitation to the props. Boat lengths 16' (4.9 m) to 40' (12.2 m)

What is Electro-Polishing?

Electro-Polishing is a process that improves the surface finish of our 304 stainless steel trim tab blades. Electro-Polishing delivers a smoother, more reflective surface than our standard mill finish and improves surface cleanability. Electro-Polishing dissolves free iron, inclusions, and embedded particles from the surface of our trim tabs. Lenco’s in-house process improves the

near-surface chemistry of the material, and promotes the formation of an improved corrosion resistant surface layer.

15049-101 Electro-Polished

Blades are constructed of Electro-Polished 7-gauge (4.6 mm) laser cut 304 stainless steel with heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 7-gauge stainless steel Electro-Polished blades • (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors

A

The raw form of all stainless steel has a mixture of unwanted surface contaminants such as iron and much needed elements such as chromium & nickel.

Surface Contaminants Chromium & Nickel Steel

Surface Contaminants Chromium & Nickel Steel

B

• Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) See page 42

An electrical charge is added in order to remove unwanted surface contaminants and concentrate the chromium & nickel at the surface.

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

Surface Contaminants Chromium & Nickel Steel

Surface Contaminants Chromium & Nickel Steel

Back Plate Dimensions

C

SHIPPED FULLY ASSEMBLED

What is left is a stainless steel that has become much more impervious to the environment with an aesthetically pleasing “BLING” appeal.

5" (12.7 cm)

8" (20.3 cm)

10" (25.4 cm)

2" (5.1 cm)

12" (30.5 cm)

The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.

Benefits of electro-polishing • Removes iron and potential contaminants from the surface of our trim tabs. • Removes a small amount of material from the surface of our trim tab blades, also removing small burrs. • Enhances the chromium and nickel content providing added resistance against environmental factors such as air, fresh and salt water. • Polishes areas inaccessible by any other polishing methods. • Provides a clean and smooth surface that is aesthetically pleasing.

Min. Transom Height 10.5" (26.7 cm) 10.5" (26.7 cm)

Part #

L" X W"

Boat Length

15048-101 15049-101

14" x 12" 18" x 12"

16'–32' 20'–40'

Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 15

lencomarine.com

High Performance (HP) Trim Tab Kits 12V System / Dual Actuator Same powerful features and unique blade design as the single HP series with double the actuator support for larger, faster boats. Boat lengths 24' (7.3 m) to 52' (15.8 m)

Hybrid Trim Tab Kits 12V & 24V Systems/ Single Actuator

Engineered to combine the benefits and features of our Limited Space and Super Strong series. This ultra-compact design utilizes a greater deflection angle creating substantial lift with less surface area. Boat lengths 30' (9.1 m) to 60' (18.3 m)

15051-101 Electro-Polished

15146-101

Blades are constructed of Electro-Polished 7-gauge (4.6 mm) laser cut 304 stainless steel, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed. Kits include: • (2) 7-gauge stainless steel Electro-Polished blades • (4) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors

Blades constructed of 7-gauge (4.6 mm) laser cut 304 stainless steel with 3/8" (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16" (.8 cm) upper and lower stainless steel mounting bolts. Also includes (2) 3.75" (9.5 cm) sacrificial anodes installed.

Kits include: • (2) 7-gauge stainless steel blades with standard finish • (2) Standard actuators with 6' (1.8 m) lead and Deutsch connectors • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets • Lenco owner's/installation manual • Stainless steel mounting hardware • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) See page 42

• Lenco owner's/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (4 required) See page 42

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

Back Plate Dimensions

SHIPPED FULLY ASSEMBLED

6" (15.2 cm)

8" (20.3 cm) 2"

10" (25.4 cm)

Part #

Voltage

L" X W" 4" x 18" 4" x 24" 4" x 30" L" X W" 4" x 18" 4" x 24" 4" x 30"

Boat Length

(5.1 cm)

14" (35.6 cm)

15145-101 15146-101 15147-101

12V 12V 12V

30'–44' 42'–52' 48'–60'

The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.

Part #

Voltage

Boat Length

15148-101 15149-101 15150-101

24V 24V 24V

30'–44' 42'–52' 48'–60'

Part #

L" X W"

Boat Length Min. Transom Height

15050-101 15051-101 15068-101

21" x 14" 25" x 14" 29" x 14"

24'–42' 28'–46' 30'–52'

10.5" (26.7 cm) 10.5" (26.7 cm) 10.5" (26.7 cm)

Switch kits sold separately See pages 30–32

Switch kits sold separately See pages 30–32

ELECTRIC TRIM TAB KITS 16

lencomarine.com

Super Strong Trim Tab Kits 12V & 24V Systems/ Single Actuator

Super Strong Trim Tab Kits 12V & 24V Systems/ Dual Actuator

This Super Strong design is for sport fishing, large cruising and commercial vessels. This series has a completely flat blade design which reduces spray giving you a clean, dry ride. Boat lengths 24' (7.3 m) to 52' (15.8 m)

Offering the same features as our single system, this series gives you a longer blade design with dual actuator support for those large vessels needing that extra lift. Boat lengths 35' (10.6 m) to 80' (24.4 m)

15022-101

15018-101

Blades are constructed of 7-gauge (4.6 mm) laser cut 304 stainless steel with 3/8" (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16" (.8 cm) upper and 3/8" (9.5 mm) lower stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.

Blades are constructed of 7-gauge (4.6 mm) laser cut 304 stainless steel with 3/8" (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16" (.8 cm) upper and 3/8" (9.5 mm) lower stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.

Kits include: • (2) 7-gauge stainless steel standard finish blades • (2) 15055-001 12 Volt (15062-001 for 24 Volt) XD Extreme Duty actuators with 6' (1.8 m) & Deutsch connectors • (2) 15140-001 120 Lower Mounting Brackets • Lenco owner's/installation manual • Stainless steel mounting hardware • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) See page 42

Kits include: • (2) 7-gauge stainless steel standard finish blades • (4) 15055-001 12 Volt (15062-001 for 24 Volt) XD Extreme Duty actuators with 6' (1.8 m) & Deutsch connectors • (4) 15140-001 120 Lower Mounting Brackets • Lenco owner's/installation manual • Stainless steel mounting hardware • Note: Actuator extension harnesses not in kits, must be purchased separately (4 required) See page 42

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

Part #

Voltage

L" X W"

Boat Length

Part #

Voltage

L" X W"

Boat Length

15018-101 15019-101 15020-101 15021-101

15022-101 15023-101 15024-101 15025-101

12V 12V 12V 12V

12" x 18" 12" x 24" 12" x 30" 12" x 36"

24' – 40' 27' – 44' 30' – 48' 33' – 52'

12V 12V 12V 12V

16" x 24" 16" x 30" 16" x 36" 16" x 42"

35' – 50' 40' – 60' 45' – 70' 50' – 80'

Part #

Voltage

L" X W"

Boat Length

Part #

Voltage

L" X W"

Boat Length

15026-101 15027-101 15028-101 15029-101

15030-101 15031-101 15032-101 15033-101

24V 24V 24V 24V

12" x 18" 12" x 24" 12" x 30" 12" x 36"

24' – 40' 27' – 44' 30' – 48' 33' – 52'

24V 24V 24V 24V

16" x 24" 16" x 30" 16" x 36" 16" x 42"

35' – 50' 40' – 60' 45' – 70' 50' – 80'

Switch kits & Harnesses sold separately Switches on pages 30–32 Harnesses on page 42

Switch kits & Harnesses sold separately Switches on pages 30–32 Harnesses on page 42

ELECTRIC TRIM TAB KITS 17

lencomarine.com

Heavy Duty Trim Tab Kit 12V System

Heavy Duty Trim Tab Kit 12V System

The largest and strongest HD Trim Tab Series. Similar to our 10-gauge HD systems, this series was engineered using 7-gauge 1/4" thick stainless steel blades. While using a single actuator application, these systems perform best on larger vessels, including commercial applications, and go fast boats. Boat Lengths 24' (7.3 m) to 46' (14m)

This Heavy Duty system is similar to our 7-gauge system, but with a wider trailing edge profile giving it a larger surface area when making trim adjustments. The sides and back edges of this blade are bent up at 90 degrees providing added strength to the blade. This HD system is engineered for boats that need strength along with extra lift from the wider trailing edge profile. Boat lengths 23’ (7.01m) to 50’ (15.24m)

15162-103 Electro-Polished

15165-103 Electro-Polished

Blades are constructed of Electro-Polished 7-gauge (4.6 mm) laser cut 304 stainless steel, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with remote gland-seal, welded on stainless steel upper and a single adjustable lower C-channel bracket. 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.

Blades are constructed of Electro-Polished 10-gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with remote gland-seal, welded on stainless steel adjustable C-channel with 3/8" (9.5 mm) stainless steel mounting hardware and a 3.75" (9.5 cm) sacrificial anodes installed Kits include: • (1) Key Pad Assembly Indicator 30343-001 • (1) Control Box Assembly Indicator 30368-001 • (2) 10-gauge stainless steel electro-polished blades • (2) 15158-001 Heavy Duty actuators with

Kits include: • (1) Key Pad Assembly Indicator 30343-001 • (1) Switch Control Box Indicator 30368-001 • (2) 7-gauge stainless steel Electro-Polished blades

• (2) Heavy Duty Actuators 15158-001 • (1) Lenco owner’s/installation manual • Note: Boat-mounting hardware to be supplied by customer • Note: Actuator extension harnesses not in kits, must be purchased separately (2) required See page 42

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.

6’ (1.8 m) leads & Deutsch connectors • (1) Lenco owner’s/installation manual • Note: Boat-mounting hardware to be supplied by the customer • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required) see page 42

Back Plate Dimensions

Back Plate Dimensions

5" (12.7 cm)

6" (15.2 cm)

SHIPPED FULLY ASSEMBLED

SHIPPED FULLY ASSEMBLED

8" (20.3 cm)

8" (20.3 cm) 2"

10" (25.4 cm)

10" (25.4 cm)

2" (5.1 cm)

(5.1 cm)

12" (30.5 cm)

14" (35.6 cm)

Part #

L" X W"

Boat Length Min Transom Height

Part #

L" X W"

Boat Length Min Transom Height

15162-103 15163-103

15164-103 15165-103

21" x 14" 24' – 42' 25" x 14" 28' – 46'

10.5" (26.7 cm) 10.5" (26.7 cm)

19" x 14" 23' – 45' 24" x 14" 25' – 50'

10.5" (26.7 cm) 10.5" (26.7 cm)

Two Piece indicator switch included with kit

Two Piece indicator switch included with kit

ELECTRIC TRIM TAB KITS 18

lencomarine.com

1

2

3

4

Lenco's switch technology improves accuracy & integrates control box functionality into the key pad bezel.

These 36" Power Pigtails work with any of our single actuator trim tab system kits (14 Awg wires with DTP Plug).

20' Deutsch Connected Actuator Extension Harnesses work with any of our trim tab system kits (14 Awg wires).

Our original Standard Trim Tab kit comes with two actuators with 6' leads,

Deutsch connectors, blades and hardware.

Orange wire must connect to ON/OFF power source

Integrated Switch

Key switch or ON/OFF 12 or 24 Volt power source

1

Port side (Red striped wires)

6' (1.8 m) actuator wire leads and Deutsch connectors

Circuit breaker or fuse 20A@12V 10A@24V

2

Power Pigtail

3

Actuator Extension Harnesses

12V or 24V power source

Starboard side (Green striped wires)

Standard Trim Tab Boat Diagram 12 Volt / Single Actuator

This is an example of a typical installation of a new trim tab kit. The diagram reveals Lenco's easy installation process of the Standard Trim Tab Kit with single actuator and the Integrated (ALL-IN-ONE) LED Tactile Switch. Everything you see in this diagram can be bought together in our Complete Standard Trim Tab Kit seen on page 12. Package contents for a Standard Trim Tab Retail Kit

4

Standard Trim Tab Kit

For complete installation instructions please see our owners manual or visit our troubleshooting page at lencomarine.com

LENCO TRIM TAB SELECTION GUIDE 3 EASY STEPS TO FIND YOUR TRIM TAB SYSTEM KIT

All boat configurations are different. Using this selection guide, choose the largest trim tab that fits your particular boat. For additional information visit lencomarine.com

step 1 Choose the appropriate minimum transom height of your motor boat.

step 2 Choose the appropriate overall length of your motor boat.

step 3 Choose your desired trim tab L" x W" from the available choices.

WE MAKE THE BEST BOATS BETTER! For additional trim tab information visit us at lencomarine.com

AUTO GLIDE KITS 20 AUTO GLIDE KITS

lencomarine.com

Auto Glide Automatic Boat Leveling System

Auto Glide Replacement Parts

Auto Glide Adapter Cables

Auto Glide NMEA 2000 Network Accessories

22

24

25

25

Auto Glide provides hands- free, automatic trim control, enhanced performance & increased fuel efficiency.

We have a large selection of replacements parts available for the Auto Glide Boat Leveling System.

Our wide variety of Auto Glide Adapter Cables allow for customizable system installations.

NEMA 2000 Network accessories are available to allow for installation on vessels with or without an existing NEMA 2000 network.

The Lenco Auto Glide helps take your mind off of balancing your boat and back to enjoying your time on the water. Your budget will be balanced as well with the world’s best fuel efficiency features. Balance your time, your boat and your budget with the Lenco Auto Glide Boat Leveling System. Automatic Boat Leveling System

Auto Glide Pitch Correction

Auto Glide Roll Correction

FUEL EFFICIENT

PLUG & PLAY

100% COMPATIBLE

GPS TECHNOLOGY

ECO FRIENDLY

PRODUCT CERTIFIED

MADE IN THE USA

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44

www.lencomarine.com

Powered by