2 YEAR WARRANTY WARRANTY
5 YEAR WARRANTY
100 SERIES ELECTRIC TRIM TAB KITS
33
lencomarine.navico.com
High Performance (HP) Trim Tab Kits 12V System
WARRANTY
IDEAL FOR BOATS: 16' to 40' (4.9 m to 12.2 m) single actuator 24' to 52' (7.3 m to 15.8 m) dual actuator YEAR YEAR
This powerful, unique series is designed for multiple engine applications with limited transom space. The contoured blade design allows for extra space for engines to turn as well as decreasing and preventing cavitation to the props. Blades are constructed of Electro-Polished 7-gauge (4.6 mm) laser cut 304 stainless steel with heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.
WARRANTY YEAR SHIPPED FULLY ASSEMBLED
WARRANTY YEAR
Y
WA
15049-101 Single Actuator
15051-101 Dual Actuator
Kits include: • (2) 7-gauge 304 stainless steel Electro-Polished blades • (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Note: Boat-mounting hardware to be supplied by the customer. • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required for single actuator and 4 required for dual actuator). See page 56.
Single Actuator
Boat Length
Min Transom Height 10.5" (26.7 cm) 10.5" (26.7 cm)
L" X W"
Part #
15048-101 15049-101
14" x 12" 16'–32' 18" x 12" 20'–40'
Dual Actuator
Boat Length 24'–42'
Min. Transom Height 10.5" (26.7 cm) 10.5" (26.7 cm) 10.5" (26.7 cm)
L" X W" 21" x 14"
Part #
15050-101 15051-101 15068-101
25" x 14" 28'–46' 29" x 14" 30'–52'
Back Plate Dimensions
6" (15.2 cm)
5" (12.7 cm)
15050-101 15051-101 15068-101
15048-101 15049-101
8" (20.3 cm)
Switch kits sold separately See pages 42–45. Actuator Extension Harnesses sold separately See page 56.
10" (25.4 cm)
10" (25.4 cm)
2" (5.1 cm)
2" (5.1 cm)
14" (35.6 cm)
12" (30.5 cm)
Single
Dual
The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.
Dimensional Drawings See page 38.
Powered by FlippingBook