2 YEAR WARRANTY WARRANTY
5 YEAR WARRANTY
100 SERIES ELECTRIC TRIM TAB KITS
32
lencomarine.navico.com
Extreme Duty (XD) Performance Trim Tab Kits 12V System This kit is similar to our Heavy Duty Performance series with a thicker, stronger blade for those boaters who run hard in extreme conditions. Blades are constructed of Electro-Polished 10-gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.
WARRANTY
IDEAL FOR BOATS: 20' to 40' (6.1 m to 12.2 m) single actuator 23' to 50' (7 m to 15.2 m) dual actuator YEAR YEAR
SHIPPED FULLY ASSEMBLED WARRANTY YEAR
WARRANTY YEAR
WARRANT YEAR
15045-101 Single Actuator
15046-101 Dual Actuator
Kits include: • (2) 10-gauge 304 stainless steel Electro-Polished blades • (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Note: Boat-mounting hardware to be supplied by the customer. • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required for single actuator and 4 required for dual actuator). See page 56.
Single Actuator
Boat Length
Min Transom Height 10.5" (26.7 cm)
L" X W"
Part #
15045-101
17" x 12" 20'–40'
Dual Actuator
Boat Length
Min Transom Height 10.5" (26.7 cm) 10.5" (26.7 cm)
L" X W"
Part #
15046-101 15047-101
19" x 14" 23'–45' 24" x 14" 25'–50'
Back Plate Dimensions
6" (15.2 cm)
15046-101 15047-101
5" (12.7 cm)
Switch kits sold separately See pages 42–45. Actuator Extension Harnesses sold separately See page 56.
15045-101
8" (20.3 cm)
10" (25.4 cm)
10" (25.4 cm)
2" (5.1 cm)
2" (5.1 cm)
14" (35.6 cm)
12" (30.5 cm)
Single
Dual
Dimensional Drawings See page 38.
The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.
Powered by FlippingBook