2 YEAR WARRANTY WARRANTY
5 YEAR WARRANTY
100 SERIES ELECTRIC TRIM TAB KITS
31
lencomarine.navico.com
Heavy Duty (HD) Performance Trim Tab Kits 12V System The Heavy Duty series is designed & built for the boats that need extra strength to support them in rougher water at higher speeds. Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin. Full transom back plate with welded on stainless steel upper & adjustable lower actuator mounting brackets, 5/16" (.8 cm) stainless steel mounting bolts & mechanical strain-relief cable seals. 3.75" (9.5 cm) sacrificial anodes installed.
WARRANTY YEAR
IDEAL FOR BOATS: 18' to 42' (5.5 m to 12.8 m) YEAR
SHIPPED FULLY ASSEMBLED WARRANTY YEAR
WARRANTY YEAR
Y
WA
15043-101 Heavy-duty
Kits include: • (2) 12-gauge 304 stainless steel Electro-Polished blades • (2) 15055-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors
• (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • Note: Boat-mounting hardware to be supplied by the customer
Heavy-duty
Boat Length
Min Transom Height 10.5" (26.7 cm) 10.5" (26.7 cm) 10.5" (26.7 cm) 10.5" (26.7 cm)
L" X W"
Part #
15041-101 15042-101 15043-101 15044-101
12" x 12" 18'–34' 14" x 12" 19'–36' 16" x 12" 20'–38' 18" x 14" 22'–42'
100 Series Accessories See pages 55-56.
Switch kits sold separately See pages 42–45.
Back Plate Dimensions
5" (12.7 cm)
6" (15.2 cm)
15044-101
8" (20.3 cm)
15041-101 15042-101 15043-101
Dimensional Drawings See page 38.
10" (25.4 cm)
10" (25.4 cm)
2" (5.1 cm)
2" (5.1 cm)
12" (30.5 cm)
14" (35.6 cm)
The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.
Powered by FlippingBook