Lenco Catalog 2025

AVICO GROUP

TAKING YOU FURTHER Navico Group is the world’s leading supplier of integrated systems and products to industries ranging from marine to recreational vehicle and beyond. We offer an unmatched portfolio comprised of industry-leading brands in power management, digital control & monitoring, networked devices and marine electronics.

Water, Fuel & Lighting Systems Marine Accessories Seating & Pedestals & Ladders attwoodmarine.com

Integrated Lithium-Ion Management System fathomepower.com

Battery Management Power Distribution bepmarine.com

Digital Control & Monitoring Onboard / Offboard UX czone.navico.com

Chartplotters Radar Autopilots Sonar Technology simrad-yachting.com

Battery Management Circuit Protection Power Distribution bluesea.com

Lithium Batteries Portable Power AGM Batteries relionbattery.com

Chartplotters Displays Instruments Sensors bandg.com

AC Shore Power Marine Accessories marinco.com

Chartplotters Fishfinders Sonar & Radar Trolling Motors lowrance.com

Water & Heating Systems Pumps whale.navico.com

Battery Chargers promariner.com

Trolling Motors motorguide.com

Actuators Trim Tab Systems lencomarine.navico.com

Batteries & Battery Management Power Conversion Transformers Alternators & Regulators Digital Control & Monitoring mastervolt.com

Marine Cartography c-map.com

Wire Wire Management ancorproducts.com

See how far our innovations can take you at Navico.com

Why Lenco? Because we’re proven leaders in boat stability. Innovating for the smoothest, safest, most enjoyable on-the-water experiences.

PROVEN With more than 30 years’ expertise in developing market leading products, Lenco™ is an established leader in the Marine industry.

INNOVATIVE The industry’s foremost engineers are developing trim and surf systems that push the boundaries of what’s achievable on the water.

CONNECTED As part of Navico Group™, Lenco are uniquely positioned to deliver unprecedented levels of integration and connectivity.

Welcome to the World of Trim Trim tabs provide lift to compensate for changes in speed, weight and sea state.

Trusted Safety With more predictable movement through the water, you’re better able to navigate the waves safely. Ultimate Control Added stability means you’re in greater control of your vessel. Ultimately, this makes you a better skipper, providing you the ability to make confident adjustments to your boat’s behavior.

Total Comfort A smooth ride is ultimately more

enjoyable for those on-board. By getting you on the plane faster, trim tabs help limit the impact of waves at all speeds. Proven Durability For three decades, Lenco has led the way in designing products that are built to last. From robust actuators to trim tabs with added electro-polished protection, Lenco products can be relied on time and time again, so you can relax and enjoy your time on the water.

TABLE OF CONTENTS

LENCO PRO CONTROL™

Pro Control Auto 8 NEW! Pro Control Auto System Kits 10 NEW! Pro Control Auto Keypad Kits 11 Pro Control Assist 12 NEW! Pro Control Assist System Kits 14 NEW! Pro Control Assist Keypad Kits 15 Dimensional Drawings for Pro Control 16 Pro Control (SD Pro) Actuators 17 Pro Control Accessories 18

100 SERIES ELECTRIC TRIM TAB KITS

24 Lenco Trim Tab Kits 26 Trim Tab Selection Guide 27 Standard Mount Trim Tab Kits 28 Edge Mount Trim Tab Kits 29 Standard & Edge Mount Trim Tab Kits (switch included) 30 Standard Performance Trim Tab Kits 31 Heavy Duty (HD) Performance Trim Tab Kits 32 Extreme Duty (XD) Performance Trim Tab Kits 33 High Performance (HP) Trim Tab Kits 34 Super Strong Trim Tab Kits 35 LS-Limited Space Trim Tab Kits 36 Airboat Trim Tab Kit 37 Hybrid Trim Tab Kits 37 Bennett® Hydraulic-to-Lenco Electric Conversion Kit 38 Dimensional Drawings for Trim Tab Kits

SURF

Lenco Surf 20 NEW! SD Pro Actuators for Surf Applications 19

100 SERIES CONTROLS & SWITCHES

Standard Integrated Switch Kit 42 LED Integrated Switch Kit 42 LED Indicator (TWO-PIECE) Switch Kit 43 Double Rocker Switch Kit 43 Airboat Trim Tab Rocker Switch 44 Flybridge Standard Integrated Indicator Kits 44 Flybridge LED Integrated Indicator Kits 45 Flybridge LED (Two-Piece) Indicator Kits 45 Dimensional Drawings for 100 Series Switches 46

100 SERIES ACTUATORS & HATCH LIFTS

50 Trim Tab Actuator Guide 50 Replacement HD Heavy-Duty Actuator 51 100 Series Actuators

52 Electric Hatch Lifts 54 Replacement Blades 51 56 Parts & Accessories

100 SERIES REPLACEMENT PARTS & ACCESSORIES

Mounting Brackets & Hardware

Replacement Blades 54 Mounting Brackets and Hardware 55 Parts & Accessories 56

INDEX

57 Index

NEW FROM LENCO – PRO CONTROL Nothing Comes Close. Pro Control Auto delivers best-in-class auto-levelling for unprecedented precision, control, and comfort on the water.

LENCO PRO CONTROL™

NEW! Pro Control Overview 8 NEW! Pro Control System 10

NEW! Pro Control Keypad Controller Kits 11 NEW! Pro Control Keypad Flybridge Kits 12 Pro Control Replacement Actuators 13 Pro Control Accessories 14

SD Pro Overview 16 SD Pro Actuators 17

LENCO PRO CONTROL™

lencomarine.navico.com

PRO CONTROL AUTO Nothing Comes Close.

Pro Control will change the way you think about auto levelling, providing unprecedented levels of precision, control, and comfort on the water.

74% Better Auto-Leveling*

5 Year Warranty

24% Less Impact*

Reduced Pitch

Quicker Holeshot

*vs baseline testing ◊ vs competitors (competitive boat automatic stabilization systems)

Keep a Level Head 74% better auto-levelling Pro Control is a game-changer for auto-levelling and boat stability, boasting a best-in-class 74% improvement*. Pro Control automatically counteracts an array of dynamic running conditions including weight shifts, keeping you and your passengers on an even keel. Slam No More 24% less impact Wave goodbye to the dreaded “thuds” and “slams” caused by impact, and move through water with unparalleled ease. Averaging an industry-best 24% reduction of re-entry impact*, Pro Control makes for a smoother, more comfortable/cushioned ride. Confidence Offshore Tame rough seas Have the confidence to cross the inlet and head out to deeper waters. Pro Control rivals far more expensive products when running offshore, delivering an impressive 15% pitch reduction ◊ in dynamic seas.

React Faster Control in an instant

Fast response times provide enhanced control to the helm, making near-instant adjustments in response to dynamic sea conditions. In addition, improved holeshot gets boaters on plane faster, providing superior comfort and visibility sooner, with a rapid transition into auto-levelling.

Built To Last 5-year warranty

Just because we’re more affordable doesn’t mean you have to compromise on build quality. Best-in-class 5-year warranty gives peace of mind to both boatbuilders and end users. Simple maintenance extends lifespan.

Enhanced Control with Mercury® SmartCraft®

Beyond standard (non-Mercury) engine integration, Pro Control connects with Mercury® SmartCraft® devices to enhance your experience by transforming your acceleration, offering superior levelling and control as you launch and slow down to idle.

LENCO PRO CONTROL™

lencomarine.navico.com

Pro Control Auto System Diagram

Full Pro Control Auto Kit Options See page 10.

Lenco 2k CAN Protocol

IMU (Inertial Measurement Unit)

Pro Control Auto Keypad

SD Pro Actuators and Trim Tabs

2 YEAR WARRANTY WARRANTY

5 YEAR WARRANTY

LENCO PRO CONTROL™

lencomarine.navico.com

NEW! Pro Control Auto System Kits 12V System Pro Control Auto delivers industry-leading auto-levelling for unprecedented precision, control, and comfort on the water. Standard Mount Trim Tabs —The original Trim Tab design, ideal for center console fishing boats to cuddy cabin cruisers. Edge Mount Trim Tabs —Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style.

WARRANTY YEAR

IDEAL FOR BOATS: 16' to 30' (4.9 m to 9.1 m) YEAR

WARRANTY YEAR

Standard 15182-107

Edge Mount 15186-107

Kits include: • (1) Pro Control Auto Keypad (15174-107) • (1) Pro Control Auto IMU (15180-001) • (2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades: - Standard blades - with a 5/8" (1.6 cm) flared trailing edge. - Edge Mount blades - with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge) & 1/8" (3.2 mm) diameter hinge pin. • (2) 2.25" Stroke SD Pro Actuators, 10" pin to pin (15187-001) • (6) Micro C Tee Connector (30267-001) • Micro C Power Cable with fuse and ground (30281-001) • (2) 6' Micro C Drop cables (30269-002), (1) 15' (30269-001) and (1) 25' (30269-004) Micro C Drop cables • (2) 6 Pin Detusch to Micro C Actuator Network Adapter Cable (30377-001) • (2) 3' (.91 m) Pro Control Actuator Power Pigtail (30378-001) • (2) Wake Signal Adapter for Non-Mercury Systems (30376-001) • (2) Corrosion proof Upper Mounting Brackets with gland seal (15193-101) • (2) Corrosion proof Lower Mounting Brackets (15194-101) • Lenco 2K Backbone Kit

Standard

Boat Length

Hinge Height

Min Transom Height

Retail Box Part #

L" X W" 9" x 12"

Keypad

15182-107 15184-107

16'–25'

2" (5.1 cm) 14" (35.6 cm) Auto – 2" (5.1 cm) 14" (35.6 cm) Auto –

12" x 12" 17'–30'

Pro Control Accessories See pages 18-19. Dimensional Drawings See page 16.

Edge Mount

Boat Length

Hinge Height

Min Transom Height

Retail Box Part #

L" X W"

Keypad

15186-107

12" x 12" 17'–30'

2" (5.1 cm) 11" (27.9 cm)

Auto –

2 YEAR WARRANTY WARRANTY YEAR

5 YEAR WARRANTY

LENCO PRO CONTROL™

lencomarine.navico.com

NEW! Pro Control Auto Keypad Kits Pro Control Auto Keypad with auto-levelling capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple.

WARRANTY YEAR

Helm Control/IMU 15172-107

Flybridge Control 15176-107

Helm Control/IMU Kit Includes: • (1) Pro Control Auto Keypad (15174-107) • (1) Pro Control Auto IMU (15180-001) • (3) Micro C Drop Cables: (2) 6' (1.82 m) (30269-002), (1) 15' (4.57 m) (30269-001) • (1) Wake Signal Adapter for Non-Mercury systems (30376-001) • (3) Micro C Tee Connectors (30267-001)

Flybridge Control Kit Includes: • (1) Pro Control Auto Keypad (15174-107) • (1) Micro C Drop Cable: 6' (1.82 m) (30269-001) • (1) Micro C Tee Connector (30267-001)

Helm Control/IMU

Retail Box Part #

Description

15172-107 15174-107

Auto Controller Kit

– –

Auto Replacement Keypad

Flybridge Control

Retail Box Part #

Description

15176-107 15178-107

Auto Flybridge Keypad Kit

–

Dimming Control - Day and Night Mode Dimming control lets you control the lighting across all Mercury® DTS equipment and select displays with a single button press.

Auto Replacement Flybridge Keypad –

Pro Control Accessories See pages 18-19. Dimensional Drawings See page 16.

Please Note: Pro Control Keypads are compatible with SD Pro Actuators only.

LENCO PRO CONTROL™

lencomarine.navico.com

PRO CONTROL ASSIST The control is in your hands.

Pro Control Assist offers a manual control option, featuring a smart, sleek dial controller, designed to provide a class-leading user interface. Get all the benefits of Pro Control including holeshot assist, with CAN communication protocol and the ability to store preferred positions for your trim tabs.

Programmable Memory Position Recall

NMEA 2000® Integration

Intuitive, Precise Controls

5 Year Warranty

Holeshot Assist

• CAN communication protocol as standard • Hole Shot Assist • Class leading user interface with Intuitive keypad design • Day/Night Mode for global dim on selected MFDs • Programmable Memory Position Recall • Built to Last – Easy Maintenance

LENCO PRO CONTROL™

lencomarine.navico.com

Pro Control Assist System Diagram

Full Pro Control Assit Options See page 14.

Lenco 2k CAN Protocol

Pro Control Assist Keypad

SD Pro Actuators and Trim Tabs

2 YEAR WARRANTY WARRANTY

5 YEAR WARRANTY

LENCO PRO CONTROL™

lencomarine.navico.com

NEW! Pro Control Assist System Kits 12V System Pro Control Assist is the manual control option which features a smart, sleek dial controller, providing a best-in-class user interface. Standard Mount Trim Tabs —The original Trim Tab design, ideal for center console fishing boats to cuddy cabin cruisers. Edge Mount Trim Tabs —Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style.

WARRANTY YEAR

IDEAL FOR BOATS: 16' to 30' (4.9 m to 9.1 m) YEAR

WARRANTY YEAR

Standard 15181-106

Edge Mount 15185-106

Kits include: • (1) Pro Control Assist Keypad (15175-106) • (2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades: - Standard blades - with a 5/8" (1.6 cm) flared trailing edge. - Edge Mount blades - with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge) & 1/8" (3.2 mm) diameter hinge pin. • (2) 2.25" Stroke SD Pro Actuators, 10" pin to pin (15187-001) • (5) Micro C Tee Connector (30267-001) • Micro C Power Cable with fuse and ground (30281-001) • (2) 6' Micro C Drop cables (30269-002), (1) 25' (30269-004) Micro C Drop cables • (2) 6 Pin Detusch to Micro C Actuator Network Adapter Cable (30377-001) • (2) 3' (.91 m) Pro Control Actuator Power Pigtail (30378-001) • (2) Wake Signal Adapter for Non-Mercury Systems (30376-001) • (2) Corrosion proof Upper Mounting Brackets with gland seal (15193-101) • (2) Corrosion proof Lower Mounting Brackets (15194-101) • Lenco 2K Backbone Kit

Standard

Boat Length

Hinge Height

Min Transom Height

Retail Box Part #

L" X W" 9" x 12"

Keypad

15181-106 15183-106

14'–18'

2" (5.1 cm) 14" (35.6 cm) Assist 2" (5.1 cm) 14" (35.6 cm) Assist

– –

12" x 12" 22'–30'

Pro Control Accessories See pages 18-19. Dimensional Drawings See page 16.

Edge Mount

Boat Length

Hinge Height

Min Transom Height

Retail Box Part #

L" X W"

Keypad

15185-106

12" x 12" 16'–25'

2" (5.1 cm) 11" (27.9 cm)

Assist

–

2 YEAR WARRANTY WARRANTY YEAR

5 YEAR WARRANTY

LENCO PRO CONTROL™

lencomarine.navico.com

NEW! Pro Control Assist Keypad Kits Pro Control Assist Keypad with programmable memory position recall capabilities provides intuitive, precision controls for your trim tab system. CAN communication protocol comes as standard, making integration and installation simple.

WARRANTY YEAR

2 programmable memory position recall options

Helm Control 15175-106

Flybridge Control 15177-107

Helm Control Kit Includes: • (1) Pro Control Assist Keypad (15175-106) • (2) Micro C Drop Cables, 6' (1.82 m) (30269-002) • (1) Wake Signal Adapter for Non-Mercury Systems (30376-001) • (2) Micro C Tee Connector (30267-001)

Flybridge Control Kit Includes: • (1) Pro Control Assist Keypad (15175-107) • (1) Micro C Drop Cable: 6' (1.82 m) (30269-001) • (1) Micro C Tee Connector (30267-001)

Helm Control

Retail Box Part #

Description

15173-106 15175-106

Assist Controller Kit

– –

Assist Replacement Keypad

Flybridge Control

Retail Box Part #

Description

15177-106 15179-106

Assist Flybridge Keypad Kit

–

Assist Replacement Flybridge Keypad –

Dimming Control - Day and Night Mode Dimming control lets you control the lighting across all Mercury® DTS equipment and select displays with a single button press.

Pro Control Accessories See pages 18-19. Dimensional Drawings See page 16.

Please Note: Pro Control Keypads are compatible with SD Pro Actuators only.

LENCO PRO CONTROL™

lencomarine.navico.com

Dimensional Drawings for Pro Control

Standard Mount Trim Tab Kits

Edge Mount Trim Tab Kits

11" (27.94 cm)

14" (35.56 cm)

9"–12"

12"

2" (5.08 cm)

(22.86–30.48 cm)

(30.48 cm)

9"–12"

12"

(22.86–30.48 cm)

(30.48 cm)

Note: Heights are approximate due to variablity of transom angle.

Pro Control Keypads

Hole size should be 2-1/16" (53 mm).

4.37" (111 mm)

1.97" (50 mm)

4.43" (110 mm)*

2.76" (70 mm)

*including wire allowance

Auto

Assist

WARRANTY YEAR

LENCO PRO CONTROL™

lencomarine.navico.com

Pro Control (SD Pro) Actuators A core element of the Lenco Pro Control™ system is the SD Pro Actuator - engineered to offer best in-class connectivity, precise control and an unbeatable user experience.

WARRANTY YEAR

WARRA YEA

10.5" Pin to Pin Actuator • 2.25" Stroke 15188-001

11.5" Pin to Pin Actuator • 2.25" Stroke 15189-001

12" Pin to Pin Actuator • 4.25" Stroke 15190-001

10" Pin to Pin Actuator • 2.25" Stroke 15187-001

For further information on SD Pro Actuators See page 21.

SD Pro Actuator Replacement Guide Before contacting Lenco Customer Service, please have the Parent Actuator number, Date Manufactured and Operator Code on hand. Lenco Customer Service can be reached at info.lencomarine@navicogroup.com.

Parent Actuator

Location of the imprinted actuator branding code

Date Manufactured

Operator Code

Please Note: SD Pro Actuators are compatible with Pro Control Keypads only.

LENCO PRO CONTROL™

lencomarine.navico.com

Pro Control Accessories

General Spares

Remote Gland Seal Kit 15191-101

Pro Control Auto Replacement IMU 15180-001

Actuator Hardware Kit 15195-101

Micro C Spares

Micro C Tee Connector 30267-001D

Micro C Terminating Resistor Kit (M/F) 15196-101

Micro C Power Cable with Fuse and Ground 15197-101

Micro C Drop Cable 15198-101

6 Pin Detusch to Micro C Actuator Network Adapter Cable 15205-101

2' (0.61 m) 6' (1.83 m) 15' (4.57 m) 25' (7.62 m)

15199-101 15200-101 15201-101

Connector Spares

Pro Control Power Pigtail, 36" (0.91 m) 15206-101

Mercury® SmartCraft® Interface Cable 15202-101 36" (0.91 m) 15203-101 60" (1.52 m) 15204-101 120" (3.05 m)

Wake Signal Adapter for Non-Mercury Systems 15207-101

LENCO PRO CONTROL™

lencomarine.navico.com

Pro Control Accessories

Connector Spares

Deutsch Connector Kit for Pro Control Actuator Pair 15208-101

Bracket Spares

Upper and Lower Mounting Bracket Kit with Hardware 15192-101

Upper Mounting Bracket 15193-101

Lower Mounting Bracket 15194-101

SURF

LENCO SURF Create precise, repeatable wake with Lenco.

Precision-engineered Surfing The key to better wake surfing? Practice and repetition. That’s why the SD Pro is precision engineered to deliver a repeatable wake time after time. Simply dial in your number and get surfing – cutting set-up time to a minimum. And improved response times mean you can tweak things in an instant. Simple installation The Lenco team has designed the SD Pro actuator to be easier than ever to install in your wake boats, using CAN communication protocol with no power distribution module (PDM) required. And once it’s installed, it’s there to be relied upon, season after season, with a 5-year warranty as standard. Best-in-class connectivity We know the importance of intelligent, interconnected systems. That’s why the SD Pro is built on new CAN-based hardware, to make integration seamless and simple.

Make It Yours The only actuator to enable full white label production, the SD Pro allows you to put your own stamp on things. By implementing your own logos and colouring, the SD Pro helps build your brand and deliver a more seamless user experience. Ultimately it also helps you deliver a better performing, better looking boat to your customers.

WARRANTY YEAR

SURF

lencomarine.navico.com

NEW! SD Pro Actuators for Surf Applications Build the ultimate watersports machine with the new SD Pro actuator. The cutting-edge actuator empowers boaters to create precise, repeatable wake. Best-in-class connectivity and total customization deliver an unbeatable user experience in your own image. • Fast, precise, repeatable wake enabled through inductive sensors – within 1% accuracy • Seamless integration into surf systems, with CAN-based hardware enabling smart actuation • MFD integration available • Simple installation and intuitive commissioning • Expanded Mercury® integration, connecting directly with SmartCraft®, providing improved and superior control logic • Fault and diagnostic capability with overload protection

WARRANTY YEAR

WARRA YEA

2.6" (6.6 cm)

10" (25.4 cm)

10.5" (26.7 cm)

11.5" (29.2 cm)

12" (30.5 cm)

.375" (.95cm)

10.5" Pin to Pin Actuator • 2.25" Stroke 15188-001

11.5" Pin to Pin Actuator • 2.25" Stroke 15189-001

12" Pin to Pin Actuator • 4.25" Stroke 15190-001

10" Pin to Pin Actuator • 2.25" Stroke 15187-001

Mounting Hardware Cable Part #

Description Stroke

Volts

15187-001 15188-001 15189-001 15190-001

10" Pin to Pin 2.25" Stroke (5.72 cm) 10.5 Pin to Pin 2.25" Stroke (5.72 cm) 11.5" Pin to Pin 2.25" Stroke (5.72 cm) 12" Pin to Pin 4.25" Stroke (10.80 cm)

12V 3/8" 12V 3/8" 12V 3/8" 12V 3/8"

6' 6' 6' 6'

100 SERIES TRIM TABS Backed by 30 years of reliable and robust actuation, Lenco's 100 Series Trim Tabs Systems make your boat ride smoother, drier, faster and safer.

100 SERIES ELECTRIC TRIM TABS KITS

Customization 18 Trim Tab Selection Guide 19 Standard Mount Trim Tab Kits 20 Edge Mount Trim Tab Kits 21

Standard & Edge Mount Trim Tab Kits 22 Standard Performance Trim Tab Kits 23

Heavy Duty (HD) Performance Trim Tab Kits 24 Extreme Duty (XD) Performance Trim Tab Kits 25 High Performance (HP) Trim Tab Kits 26 Super Strong Trim Tab Kits 27 LS-Limited Space Trim Tab Kits 28 Airboat Trim Tab Kit 29 Hybrid Trim Tab Kits 30 Bennett® Hydraulic-to-Lenco Electric Conversion Kit 30

ELECTRIC TRIM TAB KITS

lencomarine.navico.com

LENCO TRIM TAB KITS Everything you need for stability in one box.

Electro-Polished

A wide range of our trim tabs are available in an electro-polished finish. This is a process that improves the surface finance of the blades and provides greater protection from the elements.

What is Electro-Polishing? Electro-Polishing is a process that improves the surface finish of our 304 stainless steel trim tab blades. Electro-Polishing delivers a smoother, more reflective surface than our standard mill finish and improves surface cleanability. Electro-Polishing dissolves free iron, inclusions, and embedded particles from the surface of our trim tabs. Lenco’s in-house process improves the near- surface chemistry of the material, and promotes the formation of an improved corrosion resistant surface layer.

Benefits: • Removes iron and potential contaminants from the surface of our trim tabs. • Removes a small amount of material from the surface of our trim tab blades, also removing small burrs. • Enhances the chromium and nickel content providing added resistance against environmental factors such as air, fresh and salt water. • Polishes areas inaccessible by any other polishing methods. • Provides a clean and smooth surface that is aesthetically pleasing.

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

100 Series System Diagram

Full 100 Series Kit Options See page 27-37.

100 Series Switches

100 Series Actuators and Trim Tabs

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

Trim Tab Selection Guide Lenco carries a variety of trim tabs to meet your needs. Use the guide below to choose the trim tab for the best solution for your boat. 1. Look below to find the type of boat you have. 2. At the top of the that table, find the width of your boat. Then go down the chart until you find the color option(s) available. Refer to the top of the table for the type. 3. Scan to the left to find out what size trim tab you need.

Standard Mount Edge Mount Runabout, Cabin Cruiser & Saltwater Fish Standard Performance Heavy Duty

Hybrid High Speed Cruisers

15' 20' 25' 30' 35' 40' 45' 50' 60' 70' 80'

4"x18" 28+ knots 4"x24" 28+ knots 4"x30" 28+ knots

45 knots

9"x9"

45 knots

9"x12"

Extreme Duty High Performance Performance - Salt Water

45 knots

9x18

9"x24" <35 knots 9"x30" <35 knots 9"x36" <35 knots

15' 20' 25' 30' 35' 40' 45' 50' 60' 70' 80'

14"x12" 45+ knots 17"x12" 45+ knots 18"x12" 45+ knots 19"x14" 45+ knots 21"x14" 45+ knots 24"x14" 45+ knots 25"x14" 45+ knots 29"x14" 45+ knots

45 knots

12"x9"

45 knots

12"x12"

12"x18" 45 knots 12"x24" <35 knots 12"x30" <35 knots 12"x36" <35 knots

Super Strong Cabin Cruisers & Trawlers

15' 20' 25' 30' 35' 40' 45' 50' 60' 70' 80'

12"x18" <35 knots 12"x24" <35 knots 12"x30" <35 knots 12"x36" <35 knots 16"x24" <35 knots 16"x30" <35 knots 16"x36" <35 knots 16"x42" <35 knots

45 knots

14"x12"

45 knots

16"x12"

45 knots 45 knots

18"x12" 18"x14"

2 YEAR WARRANTY WARRANTY

5 YEAR WARRANTY

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

Standard Mount Trim Tab Kits 12V System The series that started the electric revolution! Our original Trim Tab design and still the most popular series we build. Ideal for center console fishing boats to cuddy cabin cruisers. Blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.

WARRANTY YEAR

IDEAL FOR BOATS: 14' to 69' (4.3 m to 21 m) YEAR

WARRANTY YEAR

Standard Finish 15001-101

Electro-Polished Finish 15113-101

Kits include: • (2) 12-gauge 304 stainless steel standard or electro-polished blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets

Standard

Boat Length 14'–18' 16'–25' 22'–30' 26'–40' 30'–50' 34'–65'

Hinge Height

Min Transom Height

Retail Box Part #

L" X W" 9" x 9" 9" x 12" 9" x 18" 9" x 24" 9" x 30" 9" x 36"

15000-101 15001-101 15002-101 15003-101 15004-101 15005-101 15007-101 15008-101 15009-101 15010-101 15011-101

2" (5.1 cm) 14" (35.6 cm) Yes 2" (5.1 cm) 14" (35.6 cm) Yes 2" (5.1 cm) 14" (35.6 cm) – 1" (2.5 cm) 14" (35.6 cm) – 1" (2.5 cm) 14" (35.6 cm) – 1" (2.5 cm) 14" (35.6 cm) – 2" (5.1 cm) 14" (35.6 cm) Yes 2" (5.1 cm) 14" (35.6 cm) – 1" (2.5 cm) 14" (35.6 cm) – 1" (2.5 cm) 14" (35.6 cm) – 1" (2.5 cm) 14" (35.6 cm) –

12" x 12" 17'–30' 12" x 18" 26'–36' 12" x 24" 30'–44' 12" x 30" 34'–54' 12" x 36" 38'–69'

100 Series Accessories See pages 55-56.

Electro-polished

Switch kits sold separately See pages 42–45.

Boat Length

Hinge Height

Min Transom Height

Retail Box Part #

L" X W" 9" x 12"

15113-101 15114-101

16'–25'

2" (5.1 cm) 14" (35.6 cm) Yes 2" (5.1 cm) 14" (35.6 cm) Yes

Dimensional Drawings See page 38.

12" x 12" 17'–30'

2 YEAR WARRANTY WARRANTY

5 YEAR WARRANTY

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

Edge Mount Trim Tab Kits 12V System

WARRANTY YEAR

Designed for boat applications where a lower actuator mounting height is desirable. Actuator mounts at the trailing edge of the blade giving it a 1/2" (1.3 cm) lower mounting height on 9" (22.9 cm) long blades & 3" (7.6 cm) lower mounting height on 12" (30.5 cm) long blades. All edges are turned up for added strength and style. The Edge Mount blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge, & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.

IDEAL FOR BOATS: 14' to 36' (4.3 m to 11 m) YEAR

WARRANTY YEAR

WARRANT YEAR

15016-101 Standard Finish

15116-101 Electro-Polished Finish

Kits include: • (2) 12-gauge 304 stainless steel standard finish blades

• (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets

Standard

Boat Length 14'–18' 16'–25' 14'–18'

Hinge Height

Min Transom Height

Retail Box

L" X W" 9" x 9" 9" x 12" 12" x 9"

Part #

15013-101 15014-101 15015-101 15016-101 15017-101

2" (5.1 cm) 13.5" (34.3 cm) Yes 2" (5.1 cm) 13.5" (34.3 cm) Yes

2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm)

Yes Yes

12" x 12" 17'–30' 12" x 18" 26'–36'

–

Electro-polished

Boat Length

Hinge Height

Min Transom Height

Retail Box

L" X W" 12" x 9"

Part #

15115-101 15116-101

14'–18'

2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm)

Yes Yes

12" x 12" 17'–30'

100 Series Accessories See pages 55-56.

Switch kits sold separately See pages 42–45.

Dimensional Drawings See page 38.

2 YEAR WARRANTY WARRANTY YEAR

5 YEAR WARRANTY

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

Standard & Edge Mount Trim Tab Kits (switch included) 12V System

WARRANTY YEAR

IDEAL FOR BOATS: 14' to 69' (4.3 m to 21 m)

Everything you need in one box! The Standard and Edge Mount trim tab kit with the added benefit of having the integrated switch choice and power connector all included. The Standard blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 5/8" (1.6 cm) flared trailing edge & 1/8" (3.2 mm) diameter hinge pin. Edge mount blades are constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a 1" (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8" (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal. Switch included.

WARRANTY YEAR

15001-101 Standard Mount

15113-101 Edge Mount

Kits include: • Switch Kit - Choose Double Rocker, Standard Integrated or LED Integrated • (2) 12-gauge 304 stainless steel standard finish blades • (2) 15054-001 actuators with 6' (1.8 m) leads and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets

Three switches to choose from

Double Rocker Details on page 43

Standard Integrated Details on page 42

LED Integrated Details on page 42

Standard L" X W" Kit Description Switch Kit Included

Part #

15101-104 15104-102 15108-103 15103-104 15105-102 15109-103

9" x 12" 9" x 12" 9" x 12"

Standard Standard Standard

Double Rocker Switch

Standard Integrated Switch

LED Integrated Switch Double Rocker Switch

12" x 12" Standard 12" x 12" Standard 12" x 12" Standard

Standard Integrated Switch

LED Integrated Switch

Edge Mount L" X W" Kit Description Switch Kit Included

Part #

15102-104 15106-102 15110-103

12" x 12" Edge Mount 12" x 12" Edge Mount 12" x 12" Edge Mount

Double Rocker Switch

Standard Integrated Switch

LED Integrated Switch

100 Series Accessories See pages 55-56.

Dimensional Drawings See page 38.

2 YEAR WARRANTY WARRANTY YEAR

5 YEAR WARRANTY

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

Standard Performance Trim Tab Kits 12V System

WARRANTY YEAR

IDEAL FOR BOATS: 13' to 40' (4 m to 12.2 m)

Our first series designed specifically for performance. This system comes equipped with a thicker reinforced hinge and complimented with an Electro-Polished finish for added quality and protection. Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin.

WARRANTY YEAR

15037-101 Standard

Kits include: • (2) 12-gauge 304 stainless steel Electro-Polished blades

• (2) 15054-001 actuators with 6' (1.8 m) leads & Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • (2) 50014-001 lower mounting brackets

Standard

Boat Length 13'–20' 16'–26' 16'–26'

Hinge Height

Min Transom Height

Thicker Reinforced Hinge

L" X W" 9" x 9" 9" x 12" 12" x 9"

Part #

15034-101 15035-101 15036-101 15037-101 15038-101 15039-101 15040-101

2" (5.1 cm) 13.5" (34.3 cm) 2" (5.1 cm) 13.5" (34.3 cm) 2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm) 2" (5.1 cm) 11" (27.9 cm)

12" x 12" 18'–32' 14" x 12" 19'–34' 16" x 12" 20'–36' 18" x 14" 22'–40'

100 Series Accessories See pages 55-56.

Switch kits sold separately See pages 42–45.

Dimensional Drawings See page 38.

2 YEAR WARRANTY WARRANTY

5 YEAR WARRANTY

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

Heavy Duty (HD) Performance Trim Tab Kits 12V System The Heavy Duty series is designed & built for the boats that need extra strength to support them in rougher water at higher speeds. Blades are constructed of Electro-Polished 12-gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin. Full transom back plate with welded on stainless steel upper & adjustable lower actuator mounting brackets, 5/16" (.8 cm) stainless steel mounting bolts & mechanical strain-relief cable seals. 3.75" (9.5 cm) sacrificial anodes installed.

WARRANTY YEAR

IDEAL FOR BOATS: 18' to 42' (5.5 m to 12.8 m) YEAR

SHIPPED FULLY ASSEMBLED WARRANTY YEAR

WARRANTY YEAR

15043-101 Heavy-duty

Kits include: • (2) 12-gauge 304 stainless steel Electro-Polished blades • (2) 15055-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors

• (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • Note: Boat-mounting hardware to be supplied by the customer

Heavy-duty

Boat Length

Min Transom Height 10.5" (26.7 cm) 10.5" (26.7 cm) 10.5" (26.7 cm) 10.5" (26.7 cm)

L" X W"

Part #

15041-101 15042-101 15043-101 15044-101

12" x 12" 18'–34' 14" x 12" 19'–36' 16" x 12" 20'–38' 18" x 14" 22'–42'

100 Series Accessories See pages 55-56.

Switch kits sold separately See pages 42–45.

Back Plate Dimensions

5" (12.7 cm)

6" (15.2 cm)

15044-101

8" (20.3 cm)

15041-101 15042-101 15043-101

Dimensional Drawings See page 38.

10" (25.4 cm)

2" (5.1 cm)

12" (30.5 cm)

14" (35.6 cm)

The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.

2 YEAR WARRANTY WARRANTY

5 YEAR WARRANTY

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

Extreme Duty (XD) Performance Trim Tab Kits 12V System This kit is similar to our Heavy Duty Performance series with a thicker, stronger blade for those boaters who run hard in extreme conditions. Blades are constructed of Electro-Polished 10-gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.

WARRANTY

IDEAL FOR BOATS: 20' to 40' (6.1 m to 12.2 m) single actuator 23' to 50' (7 m to 15.2 m) dual actuator YEAR YEAR

SHIPPED FULLY ASSEMBLED WARRANTY YEAR

WARRANTY YEAR

WARRANT YEAR

15045-101 Single Actuator

15046-101 Dual Actuator

Kits include: • (2) 10-gauge 304 stainless steel Electro-Polished blades • (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Note: Boat-mounting hardware to be supplied by the customer. • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required for single actuator and 4 required for dual actuator). See page 56.

Single Actuator

Boat Length

Min Transom Height 10.5" (26.7 cm)

L" X W"

Part #

15045-101

17" x 12" 20'–40'

Dual Actuator

Boat Length

Min Transom Height 10.5" (26.7 cm) 10.5" (26.7 cm)

L" X W"

Part #

15046-101 15047-101

19" x 14" 23'–45' 24" x 14" 25'–50'

Back Plate Dimensions

6" (15.2 cm)

15046-101 15047-101

5" (12.7 cm)

Switch kits sold separately See pages 42–45. Actuator Extension Harnesses sold separately See page 56.

15045-101

8" (20.3 cm)

10" (25.4 cm)

2" (5.1 cm)

14" (35.6 cm)

12" (30.5 cm)

Single

Dual

Dimensional Drawings See page 38.

The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.

2 YEAR WARRANTY WARRANTY

5 YEAR WARRANTY

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

High Performance (HP) Trim Tab Kits 12V System

WARRANTY

IDEAL FOR BOATS: 16' to 40' (4.9 m to 12.2 m) single actuator 24' to 52' (7.3 m to 15.8 m) dual actuator YEAR YEAR

This powerful, unique series is designed for multiple engine applications with limited transom space. The contoured blade design allows for extra space for engines to turn as well as decreasing and preventing cavitation to the props. Blades are constructed of Electro-Polished 7-gauge (4.6 mm) laser cut 304 stainless steel with heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.

WARRANTY YEAR SHIPPED FULLY ASSEMBLED

WARRANTY YEAR

15049-101 Single Actuator

15051-101 Dual Actuator

Kits include: • (2) 7-gauge 304 stainless steel Electro-Polished blades • (2) 15056-001 XD Extreme Duty actuators with 6' (1.8 m) leads & Deutsch connectors • Note: Boat-mounting hardware to be supplied by the customer. • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required for single actuator and 4 required for dual actuator). See page 56.

Single Actuator

Boat Length

Min Transom Height 10.5" (26.7 cm) 10.5" (26.7 cm)

L" X W"

Part #

15048-101 15049-101

14" x 12" 16'–32' 18" x 12" 20'–40'

Dual Actuator

Boat Length 24'–42'

Min. Transom Height 10.5" (26.7 cm) 10.5" (26.7 cm) 10.5" (26.7 cm)

L" X W" 21" x 14"

Part #

15050-101 15051-101 15068-101

25" x 14" 28'–46' 29" x 14" 30'–52'

Back Plate Dimensions

6" (15.2 cm)

5" (12.7 cm)

15050-101 15051-101 15068-101

15048-101 15049-101

8" (20.3 cm)

Switch kits sold separately See pages 42–45. Actuator Extension Harnesses sold separately See page 56.

10" (25.4 cm)

2" (5.1 cm)

14" (35.6 cm)

12" (30.5 cm)

Single

Dual

The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transom. This applies to all products with back plates.

Dimensional Drawings See page 38.

2 YEAR WARRANTY WARRANTY

5 YEAR WARRANTY

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

Super Strong Trim Tab Kits 12V & 24V Systems This Super Strong design is for sport fishing, large cruising and commercial vessels. This series has a completely flat blade design which reduces spray giving you a clean, dry ride. Blades are constructed of 7-gauge (4.6 mm) laser cut 304 stainless steel with 3/8" (9.5 mm) diameter hinge pin. High impact corrosion proof upper and lower mounting brackets with mechanical gland cable seal, 5/16" (.8 cm) upper and 3/8" (9.5 mm) lower stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.

WARRANTY

IDEAL FOR BOATS: 24' to 52' (7.3 m to 15.8 m) single actuator 35' to 80' (10.6 m to 24.4 m) dual actuator YEAR YEAR

WARRANTY YEAR

15018-101 Single Actuator

15022-101 Dual Actuator

Kits include: • (2) 7-gauge 304 stainless steel standard finish blades • (2) 15055-001 12 Volt (15062-001 for 24 Volt) XD Extreme Duty actuators with 6' (1.8 m) & Deutsch connectors • (2) 15140-001 120 Lower Mounting Brackets • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required for single actuator and 4 required for dual actuator). See page 56.

Single Actuator Voltage L" X W" Boat Length Part # 12V 12" x 18" 24' – 40' 15018-101 12V 12" x 24" 27' – 44' 15019-101 12V 12" x 30" 30' – 48' 15020-101 12V 12" x 36" 33' – 52' 15021-101 24V 12" x 18" 24' – 40' 15026-101 24V 12" x 24" 27' – 44' 15027-101 24V 12" x 30" 30' – 48' 15028-101 24V 12" x 36" 33' – 52' 15029-101 Dual Actuator Voltage L" X W" Boat Length Part # 12V 16" x 24" 35' – 50' 15022-101 12V 16" x 30" 40' – 60' 15023-101 12V 16" x 36" 45' – 70' 15024-101 12V 16" x 42" 50' – 80' 15025-101 24V 16" x 24" 35' – 50' 15030-101 24V 16" x 30" 40' – 60' 15031-101 24V 16" x 36" 45' – 70' 15032-101 24V 16" x 42" 50' – 80' 15033-101

Switch kits sold separately See pages 42–45. Actuator Extension Harnesses sold separately See page 56.

Dimensional Drawings See page 38.

2 YEAR WARRANTY WARRANTY YEAR

5 YEAR WARRANTY

100 SERIES ELECTRIC TRIM TAB KITS

lencomarine.navico.com

LS-Limited Space Trim Tab Kits 12V System Engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. Blades are constructed of a stronger 11-gauge laser cut 304 stainless steel and 3/8" (9.5 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.

WARRANTY YEAR

IDEAL FOR BOATS: 14' to 25' (4.3 m to 7.6 m)

WARRANTY YEAR

15126-101 Standard Actuator

15088-101 XDS Actuator

Kits include: • (2) 11-gauge 304 stainless steel blades with option of standard finish or electro-polished finish • (2) actuators with 6' (1.8 m) lead and Deutsch connectors • (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal • Lower mounting brackets included

Standard Actuator

Min Transom Height

Hinge Height

Actuators In Kit

Blade Finish

L" X W"

Part #

4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Standard 15125-101 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Electro-Polished 15126-101

XDS Actuator

Min Transom Height

Hinge Height

Actuators In Kit

Blade Finish

L" X W"

Part #

15052-101

4" x 12" 13" (33 cm) 4" x 12" 13" (33 cm)

2" (5.1 cm) 15057-001 Standard

2" (5.1 cm) 15057-001 Electro-Polished 15088-101

100 Series Accessories See pages 55-56.

Switch kits sold separately See pages 42–45.

Dimensional Drawings See page 38.

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58