24 BATTERY MANAGEMENT
bepmarine.com
Twin Engine, Three Banks This system is designed for twin engine installations. It will allow the port engine to charge the port start battery and the house battery when the DVSR is engaged. It will also allow the starboard engine to charge the starboard start battery and the house battery when the starboard DVSR is engaged, giving a combined charge from two engines into the house battery until the voltage regulators on both engines control the charge. It will also allow the house battery to be charged if steaming on one engine. See table below for specifications. Part # 717-140A-DVSR
Triple Engine, Four Banks This system is designed for triple engine installations. Once again using multiple DVSRs off each start battery giving combined charge from all three engines into the house battery via DVSRs. See table below for specifications. Part # 719-140A-DVSR
See page 27 for panel versions
Dimension guide Clusters are made from uniformly square switches, each side 2.7" (69 mm)
Specifications
Battery (banks) DVSR Orientation Part #
Engine Type
LxWxH in
LxWxH mm
714-140A-DVSR 716-H-140A-DVSR 716-V-140A-DVSR
Single inboard or outboard 2
yes vertical yes horizontal yes vertical yes square no horizontal no vertical no horizontal yes horizontal yes horizontal
5.4" x 2.75" x 3"
138 x 69 x 75mm
10.85" x 2.75" x 3" 276 x 69 x 75mm 10.9" x 2.7" x 3" 276 x 69 x 75mm
716-SQ-140A-DVSR 5.4" x 5.4" x 3"
138 x 138 x 75mm
715-H 715-V 715-S
8.1" x 2.75" x 3" 207 x 69 x 75mm 2.75" x 8.1" x 3" 69 x 207 x 75mm 8.1" x 2.75" x 3" 210 x 69 x 75mm
Twin inboard or outboard 2
718-140A-DVSR 717-140A-DVSR 719-140A-DVSR
Twin inboard Twin outboard Triple outboard
3 3 4
8.1" x 5.4" x 3" 5.4" x 8.1" x 3" 8.1" x 8.1" x 3"
207 x 138 x 75mm 138 x 207 x 75mm 207 x 207 x 75mm
yes square
DVSR Charging Current: 125A continuous Battery Switch Rating: 275A continuous
Powered by FlippingBook