BATTERY MANAGEMENT 17
bepmarine.com
Panel Mounted Battery Switches
Panel Mounted Switches Designed specifically for panel mount applications. This range gives a very compact, versatile solution. • Compact, lightweight • Removable knob on 701-PM • Countersunk recesses for surface mount application • Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) • Inside: captive inserts for 3/16" (4.8 mm) nuts; full access for cables - no restrictions • Standard interchange label system (page 84) • 701-PM provides On/Off operation for one battery bank • 701S-PM offers Selector functionality (1/2/1&2) to select between two battery banks
As shown in Contour Connect panels
701S-PM
2.64" (67 mm)
Mounting Plates Single recessed. Supplied with all the mounting hardware and come in a matching grey finish.
For 701
Part # BSP-1
LxW
LxW
3.75" x 3.75" 95 x 95 mm
701-PM
Specifications
Inter. (5 min)
Crank. (10 sec)
Stud size Studs x (in/mm)
Cable to meet rating (AWG/mm 2 )
Part # OEM # 701-PM 701B-PM
LxWxH in
LxWxH mm
Cont.
Voltage Operation
2.75" x 2.75" x 3" 69 x 69 x 67 mm 275A 455A 1250A 48V DC On/Off 2x 3/8" / 10mm 3/0 / 95mm 2 701S-PM 701S-B-PM 2.75" x 2.75" x 3" 69 x 69 x 67 mm 200A 300A 1000A 48V DC 1-2-Both-Off 3x 5/16" / 8mm 1/0 / 50mm 2
Related Products
Label Sets page 84
Battery Knob Options for 701 Series • For applications where emergency parallel switch needs to be highlighted • Order separately - replaces existing knob
701-KEY-EP
701-KEY
Powered by FlippingBook