44 VENTILATION
attwoodmarine.com
Use With
1495B
Collector Box • For use with plastic louvered vent, with two 3" I.D. wire-supported ventilation hoses. • Box fastens to vent with screws or pop rivets, then vent fastens to the deck. • Corrosion-resistant plastic. For Use with Vent(s) Depth Installation Hole Size OEM Part # Part # 1495 4" 2-7/16" x 16-1/4" 1345-1 —
Plastic Louvered Vents • Constructed of paintable, corrosion-resistant ABS plastic with no sharp edges. • For 3" I.D. ventilation system with 1345 collector box. • Install with #8 fasteners.
For use with Collector Box
Installation Hole Size Color
OEM Part # Part # 1495B1 1495B5
Chrome Plated
1495A1 1495-1
1345
2-1/4" x 16"
Black
— —
Off-White
3/4"
3-7/16"
17-7/8"
Modular Vents Modular construction to accommodate any ventilation opening size by interlocking two or more center sections. End sections interlock to the center section for a finished appearance. • For 4" I.D. ventilation systems • End sections have two holes for #8 fasteners. For Use with Collector Box Section Color Installation Hole Size OEM Part # Part # 1348 (one or multiple) Center White 2-1/2" x 17-3/4" 1438F1 — Ends White 2-1/2" x 17-3/4" 1439F1 — 1438 7/8"
Collector Box For use with modular vents, with 4" I.D. wire-supported ventilation hose. • For two 4" I.D. hoses • Corrosion-resistant plastic. • Installation Hole Size: 2-3/4" x 18" For Use with Vent(s) Depth OEM Part # Part # 1438, 1439 5" 1348-1 —
5-3/8"
19-1/8"
2-3/4"
Powered by FlippingBook