42 VENTILATION
attwoodmarine.com
Vents & Collector Boxes Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant and will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.
Use With
Stainless Steel Louvered Vent • All-welded #304 Stainless Steel construction with polished finish. • Install with #8 fasteners. • Requires collector box 1487A for 3" system. For use with Collector Box(es) Installation Hole Size OEM Part # Part # 1487A1 3-1/4" x 10-3/8" 1488-1 1488-5
Collector Boxes • Collector boxes for use with 1488 stainless steel vent. • Available with cut-out for two 3" I.D. wire-supported hoses or one 4" I.D. wire-supported hose. • Corrosion-resistant plastic. For Use with Vent(s) Depth Installation Hole Size OEM Part # Part # 1488 5-9/16" 3-5/8" x 10-3/4" 1487A1 —
3/4"
4-3/8"
11-5/16"
1493
Use With
1499
Narrow Stainless Steel Louvered Vents • Suitable for installation on any flat or most contoured hulls. • Constructed of all-welded #304 Stainless Steel with a polished finish. • Vents for use with 3" I.D. ventilation systems, and require a 1343 collector box. • Install with #6 fasteners.
Collector Box • For use with narrow stainless steel vents (1493 or 1499), with two 3" I.D. wire-supported ventilation hoses. • Corrosion-resistant plastic.
For use with Collector Box
Installation Hole Size 2-1/16" x 15-15/16"
A Depth 9/16" 1/16"
OEM Part # Part # 1493-1 1493-5 1499-1 1499-5
For Use with Vent(s)
Installation Hole Size
OEM Part # Part #
Depth
2-7/16" x 16-3/16" 1343-1
1493, 1499 4-1/16"
—
1343
A
3"
16-7/8"
Powered by FlippingBook