168 HARDWARE
attwoodmarine.com
Lift Rings Stainless Steel Lift Ring
Attwood’s stern-mounted lift ring provides heavy-duty strength for boats lifted by davits, cranes or shore stations. Lifts a maximum vertical load of 12,000 lbs. Installs with 1/2" countersunk stainless steel screws and washers, which must be through-bolted with locking washers or locking nuts. Warning: Lift rings are designed to lift a boat only when fastened to the boat structure. The maximum lifting load figures listed were determined by applying a test load in the direction of the eye shank axis, with the
1-1/2"
2-3/4"
1-1/2"
4-3/4"
3-1/16"
66120
shank fixed in an immovable testing device. Listed lifting loads are for reference only. Description OEM Part # Part # Stainless steel lift ring 66120-1 —
Large Flush Lift Ring, Brass Large lifting ring allows a full grip. Provides strength for lifting large and heavy hatch covers. Flush appearance, neatly recessed for safety. Chrome-plated brass. Pre-drilled with four holes for #6 fasteners.
2-3/8"
3"
2-3/8"
3"
5/16"
5/16"
3325
2-1/8"
2-1/8"
Fastener Quantity OEM Part # Part #
Description Flange Size Handle Size
3325-3
Brass
3" L x 2-1/4" W 2" L x 3/4" I.D. ring (4) #6
—
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
Powered by FlippingBook