152 HARDWARE
attwoodmarine.com
Cleats Neat Cleat
The Neat Cleat design offers what you’ve been asking for — a retractable cleat with a thin profile that installs easily on narrow gunwales. • Beautiful, strong and durable – each stanchion is a 7/8" rod of solid Enhanced 316 Stainless Steel alloy • Cleats stay up when pulled Installation is simple and quick – just drill twice with an appropriate size hole saw. Drainage chargers (included) capture moisture and send it to the bilge via pitot tubing (not included). Attwood recommends using only stainless steel fasteners for stainless steel hardware.
Friction springs hold cleat up at any position
Drainage chargers capture moisture (included)
Two hole mounting pattern for easy installation
A
C
66515
F
A
B
C
D
E
F
G
H
Installation
Above Deck Lowered
Above Deck Raised 1-5/8" 1-5/8"
Between Stan- chions
Hole Saw Size
Max. Hull Thickness
Total Length
Total Width
Line Opening
Thread Length 1-3/4" 1-3/4"
Install. Depth 3-1/8" 3-1/8" 3-3/4" 5-1/4"
OEM Part #
Part #
66515-1 66515-7 66517-1 66517-7
4-1/2" 1-5/16"
1/2" 1/2"
1-1/4" 1-1/4" 1-3/8" 1-5/8"
1-3/4" 2-1/4"
1" 1" 1" 1"
1" 1"
6" 8"
1-1/2"
66519-1 66538-1
1-15/16" 3/4"
2"
2-13/16" 2-1/4"
1-1/2" 1-1/2"
— —
10"
2-7/16"
13/16"
2-5/8"
3-1/2"
2-7/8"
Neat Cleat Accessories Description
OEM Part #
Part #
Backing Plates For 4-1/2" Neat Cleat
66529-1 66531-1 66533-1
— — —
For 6" Neat Cleat or Combo Cleat For 8" Neat Cleat or Combo Cleat Spacers For 6" Neat Cleat or Combo Cleat
66529
66617-1
—
For our Stainless Steel Thru-Hulls and Scuppers see Pages 26-27.
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
Powered by FlippingBook