MARINE PRODUCTS SELECTION
TAKING YOU FURTHER Navico Group is the world’s leading supplier of integrated systems and products to industries ranging from marine to recreational vehicle and beyond. We offer an unmatched portfolio comprised of industry-leading brands in power management, digital control & monitoring, networked devices and marine electronics.
Battery Management Power Distribution navico.com/bep
Digital Control & Monitoring Onboard / Offboard UX czone.navico.com
Lighting Marine Accessories Water & Fuel Systems attwoodmarine.com
Battery Management Circuit Protection Power Distribution bluesea.com
®
Chartplotters Radar Autopilots Sonar Technology simrad-yachting.com
Integrated Lithium-Ion Management System fathom.navico.com
Lithium Batteries Portable Power AGM Batteries relionbattery.com
Chartplotters Displays Instruments Sensors bandg.com
Actuators Trim Tab System lencomarine.navico.com
Marine Cartography c-map.com
Heating Systems Pumps whale.navico.com
Battery Chargers promariner.navico.com
Batteries Power Conversion Battery Management Transformers Alternators & Regulators Digital Control & Monitoring mastervolt.com
AC Shore Power Marine Accessories marinco.navico.com
Chartplotters Fishfinders Sonar & Radar Trolling Motors lowrance.com
Wire Wire Management navico.com/ancor
See how far our innovations can take you at Navico.com
I Founder's Vision Attwood has been a proven marine industry leader for over 100 years. Our wide range of products, including general marine accessories, seat & table hardware, and water systems & ventilation are tested to the highest USCG, ABYC, and CE standards. At Attwood, quality is our highest priority. I Innovation & Engineering Attwood products are designed and tested to ensure performance and reliability. I Product Focus Attwood is the leading supplier to OEM’s in a majority of our categories, including general marine accessories, fuel systems, lighting, seat & table hardware, and water systems & ventilation. I Global Reach A global distribution network provides convenient access to products when they are needed. I Industry Standards Industry involvement ensures products meet industry safety & regulatory standards. I Trusted Quality Highest quality products and systems you can trust. What makes Attwood different:
Table of Contents
Water Systems Bilge & Aerator Pumps Bilge & Float Switches
9
18 19 21 22 23
Sump Boxes
Shower Systems
p. 9
p. 13
p. 16
p. 19
Battery & Hand Operated Pumps
Pump Kits & Accessories Plumbing System Fittings
25 Thru-Hulls & Scupper Valves Fittings 26 Drains, Drain Plugs & Tubes 31
p. 22
p. 29
p. 33
Ventilation In-Line Blowers
36 38
Vents & Collector Boxes
p. 37
p. 38
Lighting Deck Mount Sidelights
48 52 56 62 64 65 66 67
Pole Mounted Plug-In Sidelights All-Round Plug-In Lights & Bases
PowerBase Series
All-Round Fold-Down Lights All-Round Fixed Base Lights
p. 48
p. 52
p. 56
p. 59
Transom Lights
Anchor/Masthead Lights
LED Lights 68 Lighting Accessories & Replacements 73
p. 62
p. 68
p. 71
p. 73
Fuel Portable Fuel Tanks & Components
77 82 87 93
Fuel Tanks & Hose Fittings Fuel Systems Components
p. 77
p. 78
p. 83
Accessories
Portable Fuel Components, International
96 97
Integrated Deck Fills, International
p. 87
p. 92
p. 98
Marine Accessories Anchoring & Mooring Equipment
102 108 116 122 132 137 144 144
Electrical Accessories
Fishing Rod Holders & Accessories Trailering Parts & Accessories Paddlesports & Accessories Marine Ropes & Cordage Marine Maintenance Products Interior & Boating Accessories
p. 102
p. 105
p. 108
p. 116
p. 133
p. 138
Hardware Cleats
152 157 161 165 167 168 169
Gas Springs & Accessories Gas Spring Mounting Brackets
p. 152
p. 157
p. 165
Water Ski Hardware Handles & Hand Rails
Lift Rings
Hawse Pipes & Bow Eyes
p. 167
p. 168
p. 169
Hooks 170 Bimini Style Convertible Top Accessories 171 Hinges 172 Hatch & Door Hardware 174
p. 170
p. 172
p. 174
Seating Systems & Pedestals Latitude™ Series 179 Millennium Series 183 Standard Series 186 Seat Suspension Systems 187 Tandem Slides 188 Seat Swivels 189 278 Series 190 238 Series 192 Pin Post Pedestals 197 Value Pedestals, Swivels & Adapters 201 Seating Systems 206 Fishing Seats 211
p. 190
p. 178
p. 183
p. 188
p. 201
p. 209
p. 197
p. 211
Table Hardware Pedestals
215 216 219
Pedestal Hardware
Side Mount Table Leg System
p. 219
p. 215
p. 217
p. 219
Boarding Ladders Transom Ladders
222 224 228
Boarding Ladders Sport/Diver Ladders
p. 229
p. 222
p. 223
p. 224
Appendix & Index Part Number Index
232
WATER SYSTEMS
Bilge & Aerator Pumps
Sump Pump Boxes
Pump Kits
Attwood pumps are tested and approved as standard equipment by leading boat manufacturers. Bilge and aerator pumps are engineered for high performance, easy installation, and meet U.S. and International certificates and standards. 9
19 Complete shower sump pump systems deliver fast water flow into and out of the sump with easy installation. Meets or exceeds all applicable standards of the ABYC and USCG.
23
Aerator and bilge pump kits are crafted to provide convenience, even while you are underway.
WATER SYSTEMS
Accessories & Fittings
Thru-Hull & Scupper Valve Fittings
Drain & Drain Plugs
24 Required accessories and fittings that can be found within our pump kits or sold separately for easy replacement.
26
31
Backed by Attwood's trusted lifetime warranty, our easy to install thru- hulls and scupper valves are built with rugged stainless steel and a solid silicone gasket.
Durable hardware that you can rely on to provide bilge drainage when hauling out.
8 WATER SYSTEMS
attwoodmarine.com
Complete Selection A complete selection of pumps and blowers are available for fishing boats, runabouts, cruisers, yachts, and commercial boats. Attwood pumps and blowers are tested and approved as standard equipment by leading boat manufacturers. Bilge and Aerator Pumps The Heavy-Duty 1700 and 2000 bilge pumps have established Attwood into the commercial market with value-loaded industrial-duty features and performance. The Tsunami series of cartridge style bilge and aerator pumps are engineered for higher performance in the most service friendly design imaginable. Their cartridge style allows quick and easy replacement without the need to remove hoses or mounting bases. Automatic Bilge Pumps All boats over 20' long with sleeping accommodations (excluding fold-out cockpit seats) should use automatic bilge pump systems. Non-automatic pumps drawing 12A or less can easily convert to automatic operation with Attwood Automatic Float Switches (page 18). Our Sahara Series of automatic pumps range from 500 to 1200 GPH capacities. Bilge pumps are designed to exhaust standing water only. They are not intended to prevent accumulation of on-board water due to rough weather, hull damage, and/or other unsafe navigational conditions. Note: Bilge and aerator pumps must be lower than the source of water for priming. Certification, Standards, and Listings - Pumps All Attwood pumps meet or exceed the following U.S. and international certificates and standards: • ABYC H-22 • ISO 8846, 8849 Marine • U.S. Coast Guard Rule, Title 33CFR sections 183.410 and 33CFR 183.425 • NMMA “As Approved Listing” • CE • UKCA • RCA • All pumps are marine ignition protected
Choice of Electrical Connectors Attwood pumps feature several wire attachment styles to adapt to your boat’s wiring harness. Standard wire on all pumps are tinned and caulked 16-gauge for butt connection. All pumps ignition protected. Special connectors are available on special order by contacting your Attwood representative. • Packard Connector • Packard Connector, Water-Resistant • Amp Connector • Amp Connector, Water-Resistant • Deutsch Connector • Quick Silver Connector • Delphi Connector
Standard
2-Way Molded (MP1)
Packard Connector
Packard Connector, Water-Resistant
Amp Connector
Amp Connector, Water-Resistant
Quick Silver Connector
Deutsch Connector
Delphi Connector
Brown – Positive, Black – Negative, Brown & White – Manual Override
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
WATER SYSTEMS 9
attwoodmarine.com
Bilge Pumps
Automatic Bilge Pumps Sahara Mk2 is the only automatic bilge pump that eliminates air-locks • Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service • External mounting feet and integrated outlet reduces time and effort. • Universal mounting pattern makes replacement simple. • Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications • Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. • 40% better protection against water ingress and electrolysis - vs. Mk1. • 2X better protection against water ingress and electrolysis - than the leading competition.
Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
Exterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production lines.
Certifications, Standards and Listings The Sahara Mk2 Automatic Bilge Pumps meet or exceed the following U.S. and international certificates and standards: Marine electrical wiring standards
Bilge pumps standards • ABYC H-22 • ISO 8849 • ISO 15083 Ignition protection standards • ABYC C-1500 • ISO 8846 Marine • U.S. Coast Guard Rule, 33CFR-183.410
• ABYC E-11 • ISO 10133 • U.S. Coast Guard Rule, 33CFR-183.425 Approvals • NMMA "As approved listing" • CE, RCM, UKCA
Patented X-Air™ Impeller: Prevents air locking so that the pump will not run dry and burn out.
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
10 WATER SYSTEMS
attwoodmarine.com
Rated Volts DC
OEM Outlet Straight
OEM Outlet 90°
Model No.
Fuse Size Outlet Type
Check Valve
OEM Part #
Part # 5505-7
3/4" (19mm) & 1" (25mm) Barbs Yes
— — —
5505-2
S500 12V 3A
3/4" (19mm) Barb 1-3/8" Threaded*
No
— — —
Optional 5505-1 AS5505S-1 AS5505E-1 —
5505
5508-7
3/4" (19mm) & 1" (25mm) Barbs Yes
— — —
5508-2
12V 4A
3/4" (19mm) Barb 1-3/8" Threaded*
No
— — —
Optional 5508-1 AS5505S-1 AS5505E-1 —
S800
5509-7
3/4" (19mm) & 1" (25mm) Barbs Yes
— — —
5509-2
3/4" (19mm) Barb 1-3/8" Threaded*
No
— — —
24V 2A
Optional 5509-1 AS5505S-1 AS5505E-1 —
5512-7
1" (25mm) & 1-1/8" (28mm) Barbs Yes
— — —
5509
5512-2
12V 6A
1-1/8" (28mm) Barb 1-3/8" Threaded*
No
— — —
Optional 5512-1 AS5512S-1 AS5512E-1 —
S1200
5513-7
1" (25mm) & 1-1/8" (28mm) Barbs Yes
— — —
5513-2
24V 2A
1-1/8" (28mm) Barb 1-3/8" Threaded*
No
— — —
Optional 5513-1 AS5512S-1 AS5512E-1 —
Wire Length for all models 29-1/2" (750mm). *Must be used with appropriate Sahara outlet.
5512
Service Kits: • AK5505-7 for S500 and S800 • AK5512-7 for S1200 • Service kits for Barb versions not available
12 Volt Specifications
ABYC Specifications 13.6-volts DC (GPH=Gallons Per Hour)
ISO Specifications 12.0-volts DC (LPH=Liters Per Hour)
Automotive Fuse Required (amps)
NRV Fitted
0 ft. Head GPH/amps
3.3 ft. Head GPH/amps
6.7 ft. Head GPH/amps
0m Head LPH/amps
1m Head LPH/amps
2m Head LPH/amps
Max Head (ft@13.6V/m@12V)
Model
3 3 5 5 6 6
N 457/1.6
219/1.5 191/1.5 460/3.6 452/3.5
25/1.4 33/1.5
1530/1.6 757/1.3 1368/1.6 577/1.3
0 0
5.6/1.5 5.6/1.5
T500
Y
432/1.6
N 825/4.0
287/3.4 276/3.4 419/3.5 351/3.5
2314/3.6 2071/3.6 1002/3.2 10.9/2.6
T800
Y
839/3.9
2274/3.6 1596/3.6 882/3.2
10.9/2.6
N 1146/4.0 654/3.8
4140/3.7 2650/3.6 1633/3.2 11.2/2.7 3000/3.7 2000/3.6 1122/3.0 11.2/2.7
T1200
Y
834/4.0
549/3.6
24 Volt Specifications
ABYC Specifications 27.2-volts DC (GPH=Gallons Per Hour)
ISO Specifications 24.0-volts DC (LPH=Liters Per Hour)
Automotive Fuse Required (amps)
NRV Fitted
0 ft. Head GPH/amps
3.3 ft. Head GPH/amps
6.7 ft. Head GPH/amps
0m Head LPH/amps
1m Head LPH/amps
2m Head LPH/amps
Max Head (ft@27.2V/m@24V)
Model
2 2 3 3
N 835/1.9
468/1.8 465/1.8
299/1.7 283/1.7 459/1.8 372/1.8
2268/1.8 2071/1.8 982/1.6 2228/1.8 2042/1.8 864/1.6
11/3.3 11/3.3
T800
Y
832/1.9
N 1175/2.0 680/2.0
3912/1.7 2650/1.7 1302/1.5 10.7/2.7
T1200
Y
862/2.0
593/1.9
2912/1.8 2053/1.7 946/1.5
10.7/2.7
Mounting Pattern Compatibility
Sahara Mk1
Rulemate (Old)
Rulemate (New)/DA/SA
Johnson Ultima
Shoreline
Johnson Float
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
WATER SYSTEMS 11
attwoodmarine.com
Bilge Pump Dimensions
ø 4mm 1/8"
133mm 5-1/4"
88mm 3-1/2"
73mm 2-7/8"
102mm 4"
1-3/8" UNF
ø 28mm 1-1/8"
ø 28mm 1-1/8"
ø 28mm 1-1/8" ø 25mm 1"
118mm 4-5/8"
103mm 4-1/16"
ø 25mm 1"
208mm 8-3/16"
205mm 8-1/16"
154mm 6-1/16"
Sahara Mk2 1200 Barb
Sahara Mk2 1200 with Outlet - Straight
Sahara Mk2 1200 with Outlet - 90° Elbow
ø 19mm 3/4"
ø 25mm 1"
ø 25mm 1" ø 19mm 3/4"
115mm 4-1/2"
103mm 4-1/16"
ø 19mm 1"
155mm 6-1/16"
199mm 7-13/16"
209mm 8-3/16"
Sahara Mk2 500/800 with Outlet - 90° Elbow
Sahara Mk2 500/800 Barb
Sahara Mk2 500/800 with Outlet - Straight
Performance Charts
Current Draw
Flow Rate
Sahara Mk2 500
Sahara Mk2 500 with NRV
Sahara Mk2 800
Sahara Mk2 500
Sahara Mk2 800
Sahara Mk2 1200
800/1200 24V
Sahara Mk2 800 with NRV
Sahara Mk2 1200
Sahara Mk2 1200 with NRV
5.00
12.00
4.50
10.00
4.00
3.50
8.00
3.00
2.50
6.00
2.00
4.00
1.50
1.00
2.00
0.50
0.00
0.00
0
200
400
600
800
1000
1200
1400
0
200
400
600
800
1000
1200
1400
Flow (US GPH)
Flow (US GPH)
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
12 WATER SYSTEMS
attwoodmarine.com
Heavy-Duty Bilge Pumps
Tinned and caulked wire improves corrosion- resistance and eliminates water damage
High-efficiency permanent magnet motor utilizes composite brushes and lubricated bearings to ensure long life under the most aggressive load conditions
Integrates the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump also employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated into exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticisers. Attwood’s Heavy Duty Bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat. This pump is fully submersible.
Molded two-wire seal eliminates a potential leak path Enhanced SS alloy motor shaft resists corrosion and reduces shaft seal degradation
Rugged glass- and mineral-filled polymer components withstand hull pounding, harsh bilge environments plasticizers Anti-Airlock nozzle exhausts air that causes air lock while preventing spray streams
Rotating outlet provides for improved hose installation
Mechanically energized shaft seal improves pump durability and extends motor life
Interior and exterior attachment holes offer multiple mounting options
5.97"
Locking tab and base swivel feature allow for 8 unique mounting positions
3.83"
Specifications
GPH Output @ Design Voltage 13.6V DC GPH Output @ Nominal Voltage 12.0V DC
Model No.
Rated Voltage
Amp Draw 0 ft
Max Head
Amp Draw 0 ft
Max Head
Fuse Size Hose Size 10A 1-1/8" I.D. 12A 1-1/8" I.D. 7A 1-1/8" I.D.
3.3 ft 6.7 ft
3.3 ft 6.7 ft
HD1700 12V
5.7 6.6 3.5
1700 1300 950 12 ft 2000 1600 1230 17 ft 2000 1600 1230 17 ft
5.1
1500 1100 800 11 ft 1800 1500 1200 16 ft 1800 1500 1200 16 ft
12V 24V
6
HD2000
2.9
HD1700 Pump The perfect upgrade from 1500 GPH rated pumps,especially older, over-rated designs. Delivers a true 1700 GPH at open flow while drawing less than 6A.
4730
Rated Voltage
Wire/ Connector
Model No.
OEM Part # Part #
4730-1
4730-4
HD1700
12V
36" wire
HD 1700 Pump with Anti-Airlock nozzle
HD2000 Pump Attwood’s highest capacity bilge pump! Ball-bearing design provides for cooler motor operation and longer life. Delivers over 2000 GPH at open flow while drawing less than 7A.
Rated Voltage
Wire/ Connector
4760
Model No.
OEM Part # Part #
4760-1 4770-1
4760-4 4770-4
12V 24V
36" wire 36" wire
HD2000
HD 2000 Pump with Anti-Airlock nozzle
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
WATER SYSTEMS 13
attwoodmarine.com
Manual Bilge Pumps Tsunami Mk2 is the only manual bilge pump that eliminates air-locks • Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Tsunami Mk2 is the easiest manual bilge pump to install and service • Backwards compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps. • External mounting feet and integrated outlet reduces time and effort. • Service pump cartridge from hard-to-reach areas using only one hand. Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications • 40% better protection against water ingress and electrolysis - vs. Mk1.
Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
Exterior Mounting Feet: Eliminates the need to remove the basket, saving OEMs time on production lines.
Certifications, Standards and Listings The Tsunami Mk2 Manual Bilge Pumps meet or exceed the following U.S. and international certificates and standards: Bilge pumps standards • ABYC H-22 • ISO 8849 • ISO 15083 Ignition protection standards • ISO 8846 Marine Marine electrical wiring standards • ABYC E-11 • ISO 10133 • U.S. Coast Guard Rule, 33CFR-183.425 Approvals • NMMA "As approved listing" • CE, RCM, UKCA
Patented X-Air™ Impeller: Preventsair locking so that the pump will notrun dry and burn out.
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
14 WATER SYSTEMS
attwoodmarine.com
Rated Volts DC
OEM Outlet Straight
OEM Outlet 90°
Model No.
Fuse Size Outlet Type
Check Valve
OEM Part #
Part # 5606-7
12V 3A 3/4" (19mm) & 1" (25mm) Barbs Y
— — —
5606B-1 — — —
T500
12V 3A 3/4" (19mm) Barb 12V 3A 1-3/8" Threaded*
N
Optional 5606-1 AS5605S-1 AS5605E-1 —
5608-7
12V 5A 3/4" (19mm) & 1" (25mm) Barbs Y
— — —
5606
5608B-1 — — —
T800
12V 5A 3/4" (19mm) Barb 12V 5A 1-3/8" Threaded*
N
Optional 5608-1 AS5605S-1 AS5605E-1 —
5609-7
24V 2A 3/4" (19mm) & 1" (25mm) Barbs Y
— — —
5609B-1 — — —
T800
24V 2A 3/4" (19mm) Barb 24V 2A 1-3/8" Threaded*
N
Optional 5609-1 AS5605S-1 AS5605E-1 —
5612-7
12V 6A 1" (25mm) & 1-1/8" (28mm) Barbs Y
— — —
5612B-1 — — —
T1200
12V 6A 1-1/8" (28mm) Barb 12V 6A 1-3/8" Threaded*
N
Optional 5612-1 AS5612S-1 AS5612E-1 —
5613-7
24V 3A 1" (25mm) & 1-1/8" (28mm) Barbs Y
— — —
5613B-1 — — —
T1200
24V 3A 1-1/8" (28mm) Barb 24V 3A 1-3/8" Threaded*
N
Optional 5613-1 AS5612S-1 AS5612E-1 —
5608
Tsunami Mk2 Bilge Replacement Motor Cartridges T500 12V
5620-6 5622-6 5624-6
T800 12V T1200 12V
Wire Length for all models 29" (735mm). *Must be used with appropriate Tsunami outlet.
Service Kits: • AK5605-7 for T500 and T800 • AK5612-7 for T1200 • Service kits for Barb versions not available
5612
12 Volt Specifications
ABYC Specifications 13.6-volts DC (GPH=Gallons Per Hour)
ISO Specifications 12.0-volts DC (LPH=Liters Per Hour)
Automotive Fuse Required (amps)
NRV Fitted
0 ft. Head GPH/amps
3.3 ft. Head GPH/amps
6.7 ft. Head GPH/amps
0m Head LPH/amps
1m Head LPH/amps
2m Head LPH/amps
Max Head (ft@13.6V/m@12V)
Model
3 3 4 4 5 5
N 536/1.7
334/2.2 311/2.2 503/3.6 482/3.5
200/2.1 186/2.1 356/3.4 341/3.3 565/4.3 464/4.2
1818/1.5 1156/1.5 0 1692/1.5 1116/1.5 0
7.6/1.8 7.6/1.8
T500
Y
510/1.8
N 796/3.1
2682/2.6 2246/2.6 1554/2.6 14.2/3.5 2544/2.6 2076/2.6 1440/2.6 14.2/3.5 4002/3.3 3007/3.4 1764/3.2 11.8/2.9 3124/3.4 2356/3.3 1364/3.0 11.8/2.9
T800
Y
747/3.2
N 1155/3.9 789/4.5
T1200
Y
903/4.0
659/4.4
24 Volt Specifications
ABYC Specifications 27.2-volts DC (GPH=Gallons Per Hour)
ISO Specifications 24.0-volts DC (LPH=Liters Per Hour)
Automotive Fuse Required (amps)
NRV Fitted
0 ft. Head GPH/amps
3.3 ft. Head GPH/amps
6.7 ft. Head GPH/amps
0m Head LPH/amps
1m Head LPH/amps
2m Head LPH/amps
Max Head (ft@27.2V/m@24V)
Model
2 2 2 2
N 802/1.5
472/1.5 454/1.5
340/1.4 322/1.4 474/1.8 384/1.7
3036/1.5 2262/1.6 1977/1.5 14.8/3.5 2532/1.3 2046/1.3 1464/1.2 14.8/3.5 3816/1.5 2817/1.5 1479/1.4 11.1/2.7 2946/1.6 2223/1.5 1203/1.4 11.1/2.7
T800
Y
737/1.6
N 1106/1.8 698/1.9
T1200
Y
859/1.9
602/1.8
Mounting Pattern Compatibility Tsunami Mk1 500
Tsunami Mk1 800 / 1200
Johnson L Series
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
WATER SYSTEMS 15
attwoodmarine.com
Bilge Pump Dimensions
500 Dimensions
800 Dimensions
1200 Dimensions
3.8" 97mm
4.5" 114mm
4.5" 115mm
3.7" 93mm
4.3" 110mm
4.4" 112mm
3.6", 91mm
4.0", 101mm
4.0", 101mm
6.1" 155mm
6.6" 168mm
6.6" 167mm
ø 1" 26mm ø 3/4" 19mm
ø 1" 26mm ø 3/4" 19mm
ø 1- 1/8" 28mm ø 1" 26mm
5.7" 145mm
6.2" 157mm
6.4" 163mm
ø 1" 26mm ø 3/4" 19mm
ø 1" 26mm ø 3/4" 19mm
ø 1-1/8" 28mm ø 1" 26mm
3.4" 86mm
4.1" 104mm
3.8" 96mm
ø 3/4" 19mm
ø 3/4" 19mm
ø 1- 1/8" 28mm
Performance Charts
Current Draw
Flow Rate
Tsunami Mk2 500
Tsunami Mk2 800
Tsunami Mk2 1200
Tsunami Mk2 500
Tsunami Mk2 500 with NRV
Tsunami Mk2 800
Tsunami Mk2 800 with NRV
Tsunami Mk2 1200
Tsunami Mk2 1200 with NRV
4.5
16
4.0
14
3.5
12
3.0
10
2.5
8
2.0
6
1.5
4
1.0
2
0.5
0
0.0
0
200
400
600
800
1000
1200
0
200
400
600
800
1000
1200
Flow Rate (US GPH)
Flow Rate (US GPH)
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
16 WATER SYSTEMS
attwoodmarine.com
Aerator Pumps
Tsunami Mk2 Aerator Pumps Keep your bait and fish alive with the new Tsunami Aerator Mk2. Our leading fish-friendly technology is even easier to install and service, cutting costs for both suppliers and end users. Flexible Installation • Both 90 and straight inlets and outlets
5650
Full Backwards Compatibility • With previous Tsunami models Faster, Smarter Installation • With no sealant or tools required
5643
Certifications, Standards and Listings The Tsunami Mk2 pumps meet or exceed the following U.S. and international standards: IP Rating: • IP68 Ignition protection standards • ISO 8846 Marine Marine electrical wiring standards 500 Aerator (2619644), 800 Aerator (2619645), 1200 Aerator (2619646) • CE, RCM, UKCA Approvals • NMMA "As approved listing"
5664
• ABYC E-11 • ISO 10133
Inlet Style
Inlet Length & Diameter
OEM Part #
Model
Application
OEM Outlet Straight OEM Outlet 90º
Part #
Tsunami Aerator Mk2 Pumps
5640-1 5641-1 5643-1 5644-1 5650-1 5651-1 5653-1 5654-1 5660-1 5661-1 5663-1 5664-1
5640-4
3-1/2" L x 3/4" Thru-Hull 1-1/2" L x 3/4" Thru-Hull
AS5605SS-1 (3/4" barb) or AS5605QLS-1 (3/4" Qwik-Lok™) AS5605SS-1 (3/4" barb) or AS5605QLS-1 (3/4" Qwik-Lok™) AS5612SS-1 (1-1/8" barb) or AS5605QLS-1 (3/4" Qwik-Lok™)
AS5605ES-1 (3/4" barb) or AS5605QLE-1 (3/4" Qwik-Lok™) AS5605ES-1 (3/4" barb) or AS5605QLE-1 (3/4" Qwik-Lok™) AS5612ES-1 (1-1/8" barb) or AS5605QLE-1 (3/4" Qwik-Lok™)
Straight
—
T500
5643-4 5644-4 5650-4
7/8" L x 3/4"
Seacock
Elbow 3-1/2" L x 3/4" Thru-Hull
Straight & Elbow, 3/4" included
3-1/2" L x 3/4" Thru-Hull 1-1/2" L x 3/4" Thru-Hull
—
Straight
T800
5653-4 5654-4 5660-4
7/8" L x 3/4"
Seacock
Elbow 3-1/2" L x 3/4" Thru-Hull
3-1/2" L x 1-1/8" Thru-Hull 1-1/2" L x 1-1/8" Thru-Hull
Straight
—
Straight & Elbow, 1-1/8" included
T1200
5663-4 5664-4
7/8" L x 1"
Seacock
Elbow 3-1/2" L x 1-1/8" Thru-Hull
Tsunami Mk2 Aerator Replacement Motor Cartridges T500 —
5620-6 5622-6 5624-6
— — —
— — —
T800
— —
T1200
All models are 12 volt D.C. with wire length of 29" (735mm). Second outlet thread 1/2" NPT Female.
Service Kits: • AK5605S-7 for T500 and T800, Straight and Elbow short 3/4" outlets with Washer • AK5612S-7 for T1200, Straight and Elbow short 1-1/8" outlets with Washer • AK5670-7 for all models, second outlets, Straights and Elbows 1/2", 3-4" & 1"
Specifications
ABYC Specifications 13.6-volts DC (GPH=Gallons Per Hour)
ISO Specifications 12.0-volts DC (LPH=Liters Per Hour)
Hole Saw Size
Amp Fuse
Outlet Diameter
0 ft. Head GPH/amps
3.3 ft. Head GPH/amps
6.7 ft. Head GPH/amps
0m Head LPH/amps
1m Head LPH/amps
Max Head (ft.@13.6V/m@12V)
Model
564X / T500 1-1/8" 565X / T800 1-1/8" 566X / T1200 1-3/8"
3A 3/4" barb 507 / 1.6 319 / 1.7 192 / 1.6 4A 3/4" barb 793 / 3 498 / 2.9 371 / 2.9 5A 1-1/8" barb 1143 / 3.9 748 / 3.9 527 / 3.8
1764/ 1.4 1182 / 1.4 10.4 / 2.6 2694 / 2.5 2142 / 2.5 17.4 / 4.2 3912 / 3.3 3282 / 3.3 14.8 / 3.8
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
WATER SYSTEMS 17
attwoodmarine.com
C:0 M:0 Y:0 K:100 Aerator Pump Dimensions
B
D
A
E
F
C
A
F
E
B
D
C
Flow Rate
Product Code A
Model
B
C
D
E
F
Tsunami Mk2 Aerator 500
Tsunami Mk2 Aerator 800
Tsunami Mk2 Aerator 1200
Long 5640 6.8" 172 mm 3.5" 88 mm 3.4" 86 mm 3/4 NPS
5.3" 134 mm 5.1" 129 mm
10 12 14 16 18 20
Short 5.3" 134 mm 5.1" 129 mm Seacock 5643 4.2" 106 mm 0.85" 21.6 mm 3.4" 86 mm 3/4 NPT 5.3" 134 mm 5.1" 129 mm Elbow 5644 6.1" 154 mm 3.5" 88 mm 3.4" 86 mm 3/4 NPS 9.3" 235 mm 9.1" 231 mm 5641 4.8" 122 mm 1.5" 38 mm 3.4" 86 mm 3/4 NPS
500
Long 5650 7.4" 188 mm 3.5" 88 mm 3.7" 94 mm 3/4 NPS
5.8" 147 mm 5.6" 142 mm
Short 5.8" 147 mm 5.6" 142 mm Seacock 5653 4.8" 122 mm 0.85" 21.6 mm 3.7" 94 mm 3/4 NPT 5.8" 147 mm 5.6" 142 mm Elbow 5654 6.7" 170 mm 3.5" 88 mm 3.7" 94 mm 3/4 NPS 9.6" 244 mm 9.4" 239 mm 5651 5.5" 138 mm 1.5" 38 mm 3.7" 94 mm 3/4 NPS
800
0 2 4 6 8
1200 Long 5660 7.5" 190 mm 3.5" 88 mm 3.8" 95 mm 1-3/8" UNF 5.5" 140 mm 5.8" 146 mm Short 5661 5.5" 140 mm 1.5" 38 mm 3.8" 95 mm 1-3/8" UNF 5.5" 140 mm 5.8" 146 mm Seacock 5663 4.9" 125 mm 0.9" 23 mm 3.8" 95 mm 1" NPT 5.5" 140 mm 5.8" 146 mm Elbow 5664 6.9" 175 mm 3.5" 88 mm 3.8" 95 mm 1-3/8" UNF 9.4" 238 mm 9.5" 242 mm
0
200
400
600
800
1000
1200
Performance Charts
Flow Rate (US GPH )
Current Draw
Flow Rate
Tsunami Mk2 Aerator 500
Tsunami Mk2 Aerator 800
Tsunami Mk2 Aerator 1200
Tsunami Mk2 Aerator 500
Tsunami Mk2 Aerator 800
Tsunami Mk2 Aerator 1200
4.5
10 12 14 16 18 20
4
3.5
3
2.5
2
0 2 4 6 8
1.5
1
0.5
0
0
200
400
600
800
1000
1200
0
200
400
600
800
1000
1200
Flow Rate (US GPH )
Flow Rate (US GPH )
Current Draw
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts. Tsunami Mk2 Aerator 500 Tsunami Mk2 Aerator 800 Tsunami Mk2 Aerator 1200
4.5
4
18 WATER SYSTEMS
attwoodmarine.com
Bildge & Float Switches S3 Series Automatic Bilge Switches
Incorporates a proprietary Electronic Sensing technology to detect bilge water levels and trigger pump activation and has been engineered to operate in any bilge water mixture consistently without failure. Your pump won’t be exposed to continuous cycling as the S3 switch can easily distinguish splashing bilge water, chemicals, sludge build up or foam, and comes equipped with fully sealed electronics that are completely protected from water or chemical damage. For added convenience, the bilge switch can be mounted on the floor of the bilge, directly to a stringer wall, or alongside the basket of the pump without added components or brackets. The S3 Series switch is also directly compatible with all competitive products and free of moving parts that can jam up, break or wear out over time. Marine ignition protected and RoHS compliant. Description Max. Pump Amp Draw Rated Voltage Wire OEM Part # Part # Switch, White 15A 12V 36" wire 4801-1 4801-7
4801
Float Switch Cover
Automatic Float Switches Converts bilge pumps to fully automatic operation. Maximum amp draw is 12A (at 12V DC) or 6A (at 24V DC). Features a compact, low-profile design that mounts on any surface from horizontal up to a 24° angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and “Persistent Toxic Substance” in over 26 states. Marine ignition protected and RoHS compliant.
Test Knob
Float Switch with Cover Description
Rated Voltage
Wire/Connector OEM Part #
Part # 4201-7
4201-1
Float switch with cover
12V and 24V CE rated
36" wire
5-1/4"
2-7/8"
3-7/8"
2-7/8"
4201
Float Switch Description
Rated Voltage
Wire/Connector OEM Part # Part #
4202-1
4202-7
Float switch
12V and 24V CE rated
36" wire
2-5/8"
2-7/8"
4202
1-3/8"
3-7/8"
4-1/4"
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
WATER SYSTEMS 19
attwoodmarine.com
Sump Boxes
Shower Sump Pump Systems Mk2 Attwood’s shower sump systems deliver the performance you’ve been asking for. Choose from standard box or large box sizes. Offering fast water flow into and out of sump. The lid snaps in to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air vent to prevent air locks. Meets or exceeds all applicable standards of the ABYC and USCG.
5141
Model No.
Rated Voltage
Fuse Size
Outlet Hose Size
Wire/ Connector
Box Size
OEM Part # Part #
5141-1 5142-1 5143-1 5144-1 5145-1
5141-4 5142-4 5143-4 5144-4 5145-4 5105-4 5108-4 5109-4
500 GPH 12V 3A 3/4" I.D. 800 GPH 12V 5A 3/4" I.D. 800 GPH 12V 5A 3/4" I.D. 800 GPH 24V 2A 3/4" I.D. 800 GPH 24V 2A 3/4" I.D. Service Kits Replacement Pump 500 GPH 12V Replacement Pump 800 GPH 12V Replacement Pump 800 GPH 24V
22" wire Standard 22" wire Standard 22" wire Large 22" wire Large 22" wire Standard
— — — — —
AK5141-4 AK5143-4
Replacement Standard Lid, Filter Mesh & Check Valve Replacement Large Lid, Filter Mesh & Check Valve
5143
Output Ratings
GPH Output @ Design Voltage 13.6V DC
GPH Output @ Nominal Voltage 12.0V DC
Model
Amp Draw 0 ft
3.3 ft
6.7 ft
0 ft 385 570
3.3 ft
6.7 ft
500 GPH 1.4 800 GPH 2.5
420 360 650 500
215 385
290 420
130 290
Performance for 24V version is the same (Uses 2 Amp Fuses)
Multiple Inlets Can Be Hooked Up to More Than One Drain – Using Different Hose Sizes
Optional Inlet Locations
Head Sink
Shower Stall
Galley Sink
Outlet Overboard
Outlet Overboard
Product dimensions on next page.
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
20 WATER SYSTEMS
attwoodmarine.com
Shower Sump Pump Systems Mk2 Dimensions
2-3/8" 60mm
2-3/8" 60mm
Outlet: 3/4" or 1" dia. 19mm or 25mm dia.
7-3/8" 187mm
7-3/8" 187mm
13-1/2" 343mm
10-1/2" 267mm
Inlets: 3/4" or 1" dia. 19mm or 25mm dia. 3/4" dia. 19mm dia. 1-1/8" or 1-1/2" dia. 29mm or 38mm dia.
4-1/2" 113mm
4-1/2" 113mm
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
WATER SYSTEMS 21
attwoodmarine.com
Shower Systems
Hot/Cold Aft-Deck Shower Install flush in the transom or under the gunwale. Includes hinged cover and replaceable sprayer head. Fixtures are corrosion-resistant. Housing and cover are made of high-impact, UV resistant, engineering-grade plastic and are pre-drilled for six #8 fasteners. Comes with 6' hose, shut-off, and hot/cold mixing controls. Connects to freshwater system for showering. OEM Part # Part # 4131-1 4131-4
Cold Water Shower Install flush in the transom or under the gunwale. Includes hinged cover and replaceable sprayer head. Fixtures are corrosion-resistant. Housing and cover are made of high-impact, UV resistant, engineering-grade plastic and are pre-drilled for six #8 fasteners. Hand-held shower sprayer with 6' hose and shut-off. Connects to freshwater system or self-priming wash-down pump for showering after swimming. Built-in on/off switch for pump. OEM Part # Part # 4133-1 —
9-1/2"
9-1/2"
8-1/2"
8-1/2"
5"
5"
3-7/8"
3-7/8"
2-1/4"
2-1/4"
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
22 WATER SYSTEMS
attwoodmarine.com
WaterBuster ® Portable Pump This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe because it needs no electrical cord — runs up to five hours on three alkaline "D" batteries. Excellent for use as a portable pump-out device for paddle boats, inflatables, duck boats, dingies or kayaks, any craft that lacks a hard-wire, permanent electrical system. • 6-3/8" high x 5-1/4" diameter • Pumps up to 200 gallons per hour • Includes 42” hose with garden hose adapter for adding longer hose • Lifts water to height of 40" Note: Not to be used as a permanent bilge pump GPH Open Flow GPH 2 ft Head † OEM Part # Part # 200 125 — 4140-4 † 4 ft maximum head Battery & Hand Operated Pumps
Kayak Hand Bilge Pump Safely remove unwanted water, or other liquids, from kayaks and other small boats. 18". OEM Part # Part # — 11595-2
Hand Bilge Pump Safely remove unwanted water, or other liquids, from small boats. 24", 32" Hose. OEM Part # Part # — 11596-2
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
WATER SYSTEMS 23
attwoodmarine.com
Pump Kits & Accessories
Tsunami Mk2 Recirq Aerator Kit The Tsunami Recirq Kit recirculates livewell water to keep it cooler and rich in oxygen. This self-contained system feeds a separate aerator spray head and works even while you are underway and cannot use a thru-hull connection. Add this kit to any tank that already has a freshwater fill system. Or use as a backup pump for a fail-safe system. Recirq Kit includes: • (1) 500 GPH Tsunami aerator pump with short inlet, threaded outlet • (1) 4125-1 aerator spray head • (1) 4232-1 Stainless Steel strainer • (2) Plastic hose clamps
5253
• (1) 3/4" diameter x 23" long poly hose • (1) Straight thread-to-barb connector OEM Part # Part # — 5253-4
Tsunami Mk2 Bilge Pump Installation Kits Complete kit to install manual bilge pump with 3/4" I.D. hose outlet. • (1) 2-way on/off switch with bezel plate • (1) 3/4" I.D. x 5' corrugated hose • (1) Thru-hull fitting for 3/4" I.D. hose • (2) Snap-It hose clamps • (1) 2-conductor 16-gauge wire, 20' long • (1) In-line fuse holder with 2A fuse Caution: Bilge pump switches are not external ignition protected.
4116
Hose Size
Description
OEM Part # Part #
4116-5 5614-7 4199-7 11551-5
Complete kit (without pump)
3/4" I.D.
— — — —
Complete kit with Tsunami Mk2 T-500 bilge pump 3/4" I.D.
6' hose with (2) clamps
3/4" I.D.
6' hose only
1-1/8" I.D.
3/4" (19mm) I.D. Hose
Re-Circulated Water
Intake
5614
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
24 WATER SYSTEMS
attwoodmarine.com
Bilge Switches • On/off switch with bezel plate Description Part # Bilge Switch 2-way 7615-3 Bilge Switch 3-way 7615A3
7615
Aerator Remote Mounting Brackets For mounting the aerator pump to a base, away from the transom. Description OEM Part # Part # 1-1/8" Aerator remote mounting bracket 4121-1 4121-3 3/4" Aerator remote mounting bracket 4122-1 4122-3
4121
4122
Aerator Spray Heads For use on livewells that have built-in overflows or recirculating systems. Adjustable Spray Heads
Mounts on sides of tank. 90° fitting for installation in tight spaces. Rotating head with O-ring adjusts and maintains flow setting. Removable head has an “interference-fit thread design” that will not allow it to vibrate or blow out. Polypropylene construction. Can be installed on tanks with up to 5/8" wall thickness. Non-Adjustable Spray Heads Multi-port spray maximizes oxygen level in the livewell. Constructed of ABS plastic. Double Valve Spray Head - Allows aerating options – one end can be used for freshwater fill, the other end with a recirculating pump. Single Valve Spray Head - For output from an aerator pump into the livewell.
4125
4123
Hose I.D.
Description
OEM Part # Part #
Adjustable Spray Heads Aerator spray head
4125-1 4123-1
4125-7
3/4" 3/4"
Aerator spray head w/male connector for Flow-Rite™ Qwik-Lok™ Coupler 3
—
Non-Adjustable Spray Heads Aerator spray head, single valve
4118A1 4118A5
3/4"
4118A
Check Tees These check tees replace additional connections for RV and marine hookups, providing a combination check valve and tee that allows water to flow in from the dockside connection without filling the tank. Constructed of ABS plastic. Combination Barbed Fitting Inlet and outlet both have combination fittings: Comes with 3/8" barbs that can be removed to accommodate 1/4" NPT fitting. 1/2" NPT fitting for dockside water connection. Description OEM Part # Part # Combination barbed fitting 6115-1 —
6115
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
WATER SYSTEMS 25
attwoodmarine.com
Plumbing System Fittings
Snap-It Hose Clamps Use on bilge pumps and shower sump systems. Corrosion-resistant plastic. Note: Clamps are intended for water and waste system hoses only. Hose O.D. Hose I.D. OEM Part # Part # 7/8" to 1" 3/4" 9185J1 —
Tees Three-way 90° fitting. Acetal construction. Hose I.D. OEM Part # Part # 3/4" 3892-1 —
Thread-to-Barb Connector Barbed end accommodates 3/4" I.D. hose. 3/4"-14 NPSM and 3/4" I.D. hose fitting. Threaded end fits 3888 drain fitting, A-Series aerator pump outlets and Tsunami threaded outlets. Acetal construction. Use With OEM Part # Part # 500-800 GPH pumps 3899-1 3899-3
Thread-to-Flow-Rite™ Quick-Lok™ Connector Barbed end accommodates 3/4" I.D. Threaded end fits 3888 drain fitting, A-Series aerator pump outlets and Tsunami threaded outlets. Acetal construction. Use With OEM Part # Part # 500-800 GPH pumps 3909-1 —
90° Thread-to-Barb Connector Threaded female end fits 3888 drain fitting, Tsunami 46xx series aerator and bilge pump outlets and Tsunami Aerator Mk2 inlets. Barbed end accommodates 3/4" I.D. hose. Acetal construction. For 3/4"-14 threads and 3/4" I.D. hose. Use With OEM Part # Part # 500-800 GPH pumps 3890-1 3890-3
90° Thread-to-Flow-Rite™ Quick-Lok™ Connector
Threaded female end fits 3888 drain fitting, Tsunami 46xx series aerator and bilge pump outlets and Tsunami Aerator Mk2 inlets. Male end accommodates Flow Rate™ Qwik-Lok™ Coupler. Use With OEM Part # Part # 500-800 GPH pumps 3900-1 —
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152 Page 153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180 Page 181 Page 182 Page 183 Page 184 Page 185 Page 186 Page 187 Page 188 Page 189 Page 190 Page 191 Page 192 Page 193 Page 194 Page 195 Page 196 Page 197 Page 198 Page 199 Page 200Powered by FlippingBook