ELECTRIC PUMPS
WATERMASTER ® IC PUMP CONTROLLER KIT THE WATERMASTER IC UNIT INTELLIGENTLY CONTROLS THE SUBMERSIBLE PUMP FOR TROUBLE FREE OPERATION AND PEACE OF MIND. NEVER ADJUST YOUR PRESSURE SWITCH AGAIN!
u Stops the pump pulsating at high voltages u Stops the pump running continuously at low voltages u Detects when the water container has run dry and turns pump off u Surge damper no longer required u Protects and prolongs the submersible pump u Helps lengthen battery life u Built-in fault diagnostics system u Service free, one-step calibration process
KIT INCLUDES u Watermaster IC unit u Watermaster High Flow submersible pump
Model
Watermaster Pump Controller (with Intelligent Control)
EP1632
PART NUMBER
Weight
0.65kg (1.4 lbs)
Voltage
Voltage range 9.5V d.c. to 14.5V d.c. (normal operation) / Voltage range 8.5V d.c. to 9.5V d.c. (limited operation)
Fuse Size
5 amp / automotive
Materials
Pump body: ABS, Seals: Nitrile ® , Strainer: Polypropylene, Impeller: PBT, Cable: PVC, Seal: Nitrile ® , Wire: PVC insulated copper, Hose: PVC, Plug: PBT, Watermaster IC: Polycarbonate
Nominal Current
Operating 3.7 amps, Standby 0.007 amps
Operating Temperature Range Storage Temperature
3˚C to 40˚C
-30˚C to 60˚C
Range
Accessories
WF1230 – 12mm inline water filter
Performance
Max Discharge Head
Flow rate / Current draw at 12V d.c.
0 m (0ft)
15.8 ltrs/min (3.8 amps)
1 m (3ft)
14.8 ltrs/min (3.7 amps)
3 m (9ft)
12.8 ltrs/min (3.5 amps)
WHALE.NAVICO.COM
18
Powered by FlippingBook