BILGE IC
PRE-WIRED REMOTE MOUNTED BILGE SYSTEM (4 IN 1) WITH AUTOMATIC INTELLIGENT CONTROL
u Small footprint strainer with integrated sensor fits into confined spaces u Remote mounted pump with integrated electronics - intelligent control
u Multi directional head for easy installation u Low current draw means longer battery life u Override wire included for manual activation
Model
Bilge IC
PART NUMBER
SI8284
SI8484
Weight
2.6kg (6.5lbs)
Voltage
12V d.c.
24V d.c.
Fuse size
10 amps
5 amps
Cable size
1.5mm² (16AWG)
Cable length
4m (13ft)
Hose connection
Barbed Connections Gulper IC 19mm (¾”) or 25mm (1”), Strainer IC 19mm (¾”)
Materials
Pump Head: Glass-filled Nylon, Valves: Nitrile, Diaphragm: Santoprene ®
Materials in
Glass-filled Nylon, Nitrile, Santoprene ®
contact with fluid Service kits
AK2050 - Replacement Pump Head, AS1562 - Clamping Ring
Performance
PART NUMBER
SI8284 / SI8484
Hose size
19mm (¾”)
25mm (1”)
19mm (¾”)
25mm (1”)
Suction lift
0m (0ft)
0m (0ft)
1m (3ft)
1m (3ft)
Discharge head
1m (3ft)
1m (3ft)
1m (3ft)
1m (3ft)
Flow rate
19 ltrs/min
17.5 ltrs/min (276 US GPH)
17.4 ltrs/min (270 US GPH)
15.5 ltrs/min (246 US GPH)
(300 US GPH)
For further guidance on the selection of the correct pump, please see page 118
CA WARNING: Handling recreational marine vessel parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vessel outdoors or in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/marine-vessel-parts.
WHALEPUMPS.COM
16
Powered by FlippingBook